Hardware Connections - ZyXEL Communications WPA-1000 Quick Start Manual

• Windows XP Professional or Windows 2000

1 Hardware Connections

1 Use the power adapter from the package to connect your WPA-1000's power socket to
a power source.
2 Connect the projector to the WPA-1000's VGA socket with the grey VGA cable from the
package.
3 Connect your computer to the LAN port using the red LAN cable from the package.
4 Press the ON/OFF button in to turn your device on.
I cannot start my WPA-1000
• Check the POWER is turned on.
• Check the WPA-1000 is connected to a power source.
• Restart your device.
5 Look at the LEDs (lights).
• The STATUS LED shows orange while the WPA-1000 is starting up, and green when it is
ready.
• The LAN LED blinks while sending/receiving data, then shows a steady green when it has
a successful connection.
I cannot make a LAN connection to the WPA-1000.
• Check the cables are connected properly and you are using the red Ethernet cable that
came in the package. If the cable is different, check it is an auto-crossover Ethernet cable.
WPA-1000 Quick Start Guide
2