Atx Power Connector (Atx12V, Atxpwr) - AMD AR-B7290 User Manual

AR-B7290
1.8.3

ATX Power Connector (ATX12V, ATXPWR)

These connectors are for ATX power supply plugs. The power supply plugs are designed to
fit these connectors in only one orientation. Find the proper orientation and push down
firmly until the connectors completely fit.
Important notes on the Motherboard Power Requirements
38
Make sure that your ATX 12V power supply can provide 8A on
the +12V lead and at least 1A on the +5-volt standby lead
(+5VSB). The minimum recommended wattage is 230W, or
300W for a fully configured system. The system can become
unstable and might experience difficulty powering up if the power
supply is inadequate.
You must install a PSU with a higher power rating if you intend to
install additional devices.
ATX12V
EATXPWR