Attaching The Wheels - Motocaddy S1 Instruction Manual

Attaching the Wheels

There is a left and a right wheel and it is important that you don't put them on the
wrong way round, otherwise the trolley will not move. You will find there is an "L"
and "R" on the inside of the wheel on the central hub. Left and Right sides are
determined when stood behind the trolley at the handle.
To attach the wheels follow these simple steps:
1. Slide and hold the quick-release button to the right
2. Push the wheel on to the axle as far as it will go
3. Release the button and pull the wheel outwards slightly to lock
4. A small click will confirm they are in the correct position
The outer groove can be used as a "free-wheel" option if you run out of battery
power during a round of golf.
IMPORTANT: To check you have attached the wheels correctly onto the inner
groove, you will find they will only rotate freely in one direction.
Attaching the Wheels
Page 3