Adjusting The Front Wheel Alignment - Motocaddy S1 Instruction Manual

Adjusting the Front Wheel Alignment

Adjusting the Front Wheel Alignment if your trolley is veering
In the unlikely event that your trolley is not tracking in a straight line, the alignment of the front
wheel can be adjusted to rectify the fault. This problem can be caused by a number of factors
including a slightly loose bag support or an unevenly packed golf bag. Should you wish to alter
the alignment of the front wheel, follow these simple steps:
1. Lift the quick release lever positioned on the front wheel
housing and loosen the wheel nut (fig. 1)
2. There are two small metal dials on either side of the housing
that are used to realign the wheel (fig. 2)
3. If your trolley is veering to the right, you will need to turn the left
hand dial clockwise and the right hand dial anti-clockwise
4. If your trolley is veering to the left, you will need to turn the right
hand dial clockwise and the left hand dial anti-clockwise
5. Tighten the wheel nut and push down the lever to lock the wheel
back into place (fig. 3)
This procedure can be carried out until you are happy the trolley is moving
in a straight line (please note you may only need to adjust one dial at a time).
PLEASE NOTE : These instructions are based on being in front of the trolley looking at the wheel.
Page 18
Fig 1
Fig 2
Fig 3