Using Your S1 - Motocaddy S1 Instruction Manual

Using your S1

Using your S1
The S1 is extremely simple to control. The red button is used to turn the trolley on and off, whilst also controlling the speed of
the trolley. The speed can be adjusted while the trolley is stationary or in motion. The trolley has 9 speed settings (1 to 9) with
1 being the slowest setting and 9 the fastest.
To increase the speed, rotate the speed dial
clockwise, or anti-clockwise to decrease the speed.
To start the trolley, simply select your required
speed setting and press the button. The trolley will
smoothly accelerate until it reaches the selected
speed. To stop the trolley, simply press the button
again - there is no need to reduce the speed setting.
There are two indicating LEDs below the speed
display. The right hand LED displays the battery
capacity (green, amber & red) and will illuminate as
soon as the battery is plugged in. The left hand LED
will illuminate when the power is on.
The trolley is designed to protect your battery from being fully discharged, should your battery capacity drop too low the
trolley will cut the power to the motor. If this should happen you will see "b" flashing on screen.
Page 14