Using The Upper Bag Supports - Motocaddy S1 Instruction Manual

Motocaddy s1 electric trolley, golf cuddy
Hide thumbs Also See for S1:
Table of Contents

Advertisement

Using the Upper Bag Supports / Adjusting the Bag Supports

Using the Upper Bag Supports

The upper bag support straps can be secured using the same steps as the non-EASILOCK
instructions overleaf:
1.
Stretch the elasticated strap around the bag
2.
Loop the rounded bar underneath the hook (fig. 2 previous page)
3.
Position the two placement straps centrally on your cart bag (fig. 3 previous page)
Adjusting the Bag Supports
The bag support straps are manufactured from elasticated material to allow your golf bag
to be held tightly in place.
The strap should be adjusted to be reasonably tight around the golf bag:
1.
Unclip the elasticated straps from the housing by pulling outwards in the direction
shown by the arrows (fig. 1)
2.
Move the bar as required to tighten or loosen the strap fitting.
Pulling the bar downwards will tighten, pushing it upwards will loosen (fig. 2)
3.
Ensure that the straps are clipped back in to the housing before use (fig. 3)
Page 10
Fig 1
Fig 2
Fig 3

Advertisement

Table of Contents
loading

Table of Contents