Back View
Label
Description
1
VESA mounting holes
(100 mm x 100 mm -
behind attached VESA
Cover)
2
Regulatory label
3
Stand release button
4
Security lock slot
5
Barcode serial number
label
6
USB downstream port*
7
Cable management slot
* It is recommended to use this port for your wireless USB device whenever possible.
Back view with monitor stand
Wall mount monitor using VESA-compatible wall
mount kit (100 mm x 100 mm).
Lists the regulatory approvals.
Releases stand from monitor.
Secures monitor with security lock (security lock
not included).
Refer to this label if you need to contact Dell for
technical support.
Connect your USB device to this USB charging
port, which supports fast current charging
capability if the device is BC1.2 compatible. You
can only use this connector after you have
connected the USB cable to the computer and USB
upstream connector on the monitor.
Use to organize cables by placing them through
the slot.
Use
About Your Monitor
9
|