Enter Into The Test Mode; Customer Settings; Manual Capturing; View Images Or Videos - Covert Reveal User Manual

Covert Reveal
size appropriately. In general, three to six feet is preferred.
Slide the power switch to the ON position to power on the camera and enter into
the ON mode.
After switching on the camera, the motion indication LED (red) light will blink
for about 10s. The 10s is a buffering time before automatically capturing photos or
videos, e.g. for closing and locking the bottom cover, fixing the camera on a tree and
walking away.
In TEST mode, it is required to connect the program remote. You are then able to
customize the settings. The remote must then be unplugged in for the camera to
function. If the remote is connected with the camera, the camera will not work.
The camera will take pictures or videos automatically according to the default settings
or preset customer settings.

3.4 Enter into the TEST Mode

Connect the program remote, then switch to the ON position and enter into the
TEST mode. There are three functions in TEST mode: Customer settings, manual
capture and preview. The remote is needed in this mode.

3.4.1 Customer Settings

Press MENU on the remote to enter into menu settings. The camera can then be
manually customized in settings which display on the LCD screen on the camera or
external TV monitor. The detailed operations will be described in the "Advanced
Operations" chapter.

3.4.2 Manual Capturing

The TV-in connector should be unconnected, and then press SHOT to manually
capture photos or record videos. The SHOT key must be pressed a second time to stop
the manual capturing of the video.

3.4.3 View Images or Videos

There are two ways to view the captured images or videos:
1. Viewing the SD card by computer or card reader
2. TV monitor which connect to camera with TV cable
Press OK to view images, the latest image will be shown in the LCD screen on the
TV monitor. Press UP to view the previous image and press DOWN for the next. Please
note that video cannot be played in the LCD screen and only thumbnail of the video is
showed.
The detailed operations like deleting images or videos will be described in
"Advanced Operations" chapter.

3.5 Power Off

Switch the camera to the OFF position to power off the camera. Please note that
even in the OFF mode, the camera still consumes some power. Therefore, please
remove the batteries if the camera will not be used for a long period of time.
3 Quick Introductions
Page 6