Covert Reveal
cannot be played in LCD screen on the control.
d) Press NEXT to stop playing and return to playback mode.
e) Press UP to view the next picture (or video) and DOWN for the previous.
f) Press OK to return to info display.
When viewing images, the total number of all images in the SD-card, and the
index of the displaying image will be shown respectively.
4.1.15 Delete Image or Video
a) View the image (or video) which to be deleted.
b) Press MENU to display the DELETE SELECT menu.
c) Press SHOT to select delete One or All image. One is highlighted.
d) Press OK, No and Yes are prompted. No is highlighted.
e) Press SHOT to highlight Yes.
f) Press OK to delete the image or video.
Press MENU to cancel and return to playback.
Please note that after deleting a picture or a video file, the deleted files can't be
restored! Furthermore, in order to delete all images and video clips in the SD-card, it
is suggested to format the SD-card.
4.2 File Numbering
Images and videos are saved in the pre-named folder. File numbering continues
by adding one to the last number for each new image or video. Names will save in
000001.JPG or IM000001.AVI. Through the suffix you can distinguish whether the
file is an image (with suffix .jpg) or a video (with suffix .avi).
4.3 Firmware Upgrade
This camera is equipped with an automatic upgrade function for you. Upgrading
is needed only when an improved firmware is available.
5
Mounting the Camera
When you want to use the ON mode of the camera outside, such as hunting and
monitoring the living habits of wild animals, you must mount the device on a certain
place properly. To get the optimal picture quality, the tree can be 15 feet away from
the place to be monitored, and at a height of 3-6 feet.
There are two ways to mount the camera: using a band shaped belt or bottom
screw.
Using the belt: To use the belt to fix the camera on a tree is illustrated below.
4 Advanced Operations
WARNING
!
Upgrade is risky, please be cautious!
Page
13
Need help?
Do you have a question about the Reveal and is the answer not in the manual?
Questions and answers