Table C.1: Dsriq-Srl Module Pinouts - Avocent DSR-1021 Installer/User Manual

To use History mode:
1. Press . The mode will display as History.
Ctrl-F9
2. Press one of the following key combinations to perform the indicated action:
• : Move to the top of the buffer.
Home
• : Move to the bottom of the buffer.
End
• : Move up one buffer page.
Page Up
• : Move down one buffer page.
Page Down
• : Move up one buffer line.
Up Arrow
• : Move down one buffer line.
Down Arrow
• : Enters Configuration mode. The Configuration screen will appear.
Ctrl-F8
• : While in Configuration mode, return to the previous screen with History
Ctrl-F9
mode enabled.
• : While in Configuration mode, return to the previous screen with On-Line
Ctrl-F10
mode enabled.
• : Clears the history buffer. If you choose this option, a warning screen will appear.
Ctrl-F11
Press to delete the history buffer, or
Enter
screen will reappear.
3. When finished, press
DSRIQ-SRL module pinouts

Table C.1: DSRIQ-SRL Module Pinouts

DB9-F Host Signal
Pin Name/Description
1 DCD - Data Carrier Detect
2 RXD - Receive Data
3 TXD - Transmit Data
4 DTR - Data Terminal Ready
5 GND - Signal Ground
6 DSR - Data Set Ready
7 RTS - Request to Send
8 CTS - Clear to Send
9 N/C - Not Connected
to exit History mode and return to On-Line mode.
Ctrl-F10
Signal Flow
Out of SRL
Out of SRL
In to SRL
In to SRL
N/A
Out of SRL
In to SRL
Out of SRL
N/A
to cancel the action. The previous
Escape
SRL Signal
Name/Description
DTR - Data Terminal Ready
TXD - Transmit Data
RXD - Receive Data
DSR - Data Set Ready
GND - Signal Ground
DTR - Data Terminal Ready
CTS - Clear to Send
RTS - Request to Send
N/C - Not Connected
Appendices 51