Important Notice; Listed Chimneys; Part 1: Installation - Les Foyers Don-Bar 5005 Installation, Operation And Maintenance Manual

PART 1: INSTALLATION

1. IMPORTANT NOTICE

WARNING: Any modification, change, or
substitution of any fireplace component and/or
not following the installation, operation, and
maintenance instructions can void the
warranty and put your security at risk.
1.1 Before installation begins, carefully read the
manual and contact your local building
department to determine whether a building
permit is required to install a fireplace.
1.2 The installation must follow the instructions
in this manual and local building codes. If there is
a conflict, you must follow the more restrictive
measures.
1.3 For your security, enlist the services of a
professional fireplace fitter for the installation.
1.4 Before lighting your first fire, read the
instructions of Part 2 regarding operating and
maintenance of the fireplace.
1.5 Your fireplace produces heat and provides
great ambiance but it should not be used as the
main source of heating.

2. Listed chimneys

2.1 Approved chimneys: Your Don-Bar
fireplace is designed to be installed with any 8"
I.D. ((200 mm) masonry or prefabricated
chimney bearing the ULC label S-604 (1200
degrees) or S-629 (2100 degrees) or, in the USA,.
the UL-103HT label.
REV. 2014-11
Typical installation with a ceiling
chimney outlet
Round Top
Storm Collar
Roof
Attic
Insulation
Don-Bar
Ceiling
Support
Fireplace
DON-BAR
Floor
Protection
DRAWING 1
Page 4
Factory-built
Insulated Chimney
8 inches I.D.
(200 mm)
Roof Support
Flashing
Radiation
Shield/Firestop
Radiation/Dust
Shield