Electronic Dial Model - Ouick Reference Guide - Amana ALD10DT P1331001M Service Manual

Electronic Dial Model - Quick Reference Guide
Quick Start Reference Guide
Refer to Product Safety Manual for Safety Statements
Part No.12891305
Revised 9/06
©2009 ACP, Inc.
Complete Owner's Manual available online
Oven Clearances
A—Allow at least 4" (10.2 cm) of clearance around top and sides of oven.
Proper air ow around oven cools electrical components. With restricted
air ow, oven may not operate properly and life of electrical parts is
reduced.
B—Allow at least 4" (10.2 cm) between air discharge on back of oven and
back wall.
DO NOT power spray
So...how do I use it?
Heating
1. Open oven door, place food in oven, and close oven door.
• Door must be opened and closed before time will be accepted.
2. Turn time entry knob until desired time is illuminated.
• Cooking time can be set up to 10 minutes.
• Knob must be turned within 1 minute of opening and closing door,
otherwise time entry will be disabled.
4. Oven begins operation immediately and time counts down.
5. When cooking time elapsed, microwave energy stops and oven signal
sounds.
Interrupting Operation
Open oven door to interrupt operation or turn time entry knob counterclockwise
to "0". If time was changed to "0", time will need to be reset. If door was
opened during operation, time will need to be reset.
Changing Time and Power/Canceling
Mistakes
Cooking time can be changed at any time while the oven is operating. Turn
knob to desired new setting. To set cooking time to zero, turn time entry knob
counterclockwise to "0". To add cooking time, turn knob clockwise until
desired time is illuminated.
F
or full product documentation visit:
www.amanacommercial.com
16400005
No metal pans
A–5