Electonic Model - Quick Refence Guide; Manual Operation - Amana ALD10DT P1331001M Service Manual

Countertop commercial microwave ovens
Table of Contents

Advertisement

Electronic Model - Quick Reference Guide
PROGRAM
DEFROST
1
2
3
4
5
6
8
9
10
CHECK
QTY
PROGRAM
2X
STOP/
START/
RESET
©2009 ACP, Inc.
Quick Start Reference Guide
Refer to Product Safety Manual for Safety Statemen
Oven Clearances
A—Allow at least 2" (5.1 cm) of clearance
around top and sides of oven. Proper air ow
around oven cools electrical components.
With restricted air ow, oven may not operate
properly and life of electrical parts is reduced.
B—Allow at least 2" (5.1 cm) between air
discharge on back of oven and back wall.
So...how do I use it?

Manual Operation

To cook food using a speci c entered time and power level:
1. Open oven door and place food in oven. Close door.
2. Press POWER LEVEL pad until desired power level is shown.
3. Press the number pad(s) to enter a cooking time.
4. Press START pad.
5. At end of cooking cycle oven beeps 3 times and shuts o .
11
Programming Items
12
This microwave oven has 20 programmable pads (1-20).
NOTE: Only pads 1-10 are preprogrammed at the factory.
13
1. Press PROGRAM pad.
• PROGRAM
14
2. Press the number pad to be reprogrammed. (ex. pad 5)
• PROG--05
15
• To program pads 11-20, press number pad twice rapidly.
(ex. To program pad 15, press pad 5 twice rapidly.)
16
3. Press POWER LEVEL pad to select desired power level.
7
• Power level is displayed. For less than 100%, press
17
POWER pad again until desired power level is shown.
4. Press the number pad(s) to enter a cooking time.
18
5. Press START pad to save new programming changes.
• STAGE-2
19
6. Repeat steps 3-5 to program in stage two or three.
20
• After touching START pad to save new programming
changes in 2 stage, STAGE-3
POWER
• After touching START pad to save new programming
LEVEL
changes in 3 stage, --END-- shows in the display.
+30 SEC
• Up to three di erent stages can be programmed.
7. Press STOP/RESET pad to save programming changes.
• Programming function ends.
Complete Owner's Manual available online
shows in the display.
shows in the display.
shows in the display and a long beep sounds.
16400005
shows in the display.
A–3

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ald10d p1331019mAld10t p1331002mAld 10d p1331011m

Table of Contents