Pizzacraft PizzaQue PC7001 Owner's Manual page 6

*ASSEMBLY INSTRUCTIONS FOR 18.5 IN KETTLE GRILL --> SKIP TO PAGE 10
ASSEMBLY INSTRUCTIONS FOR 22.5 IN KETTLE GRILL
Attach rear panel to side panels. Make sure bottom edges of rear panel and side panels line up flat and top edges align
2.
at an angle. Secure tightly with M5x8 screws and M5 nuts. Check to confirm the bottom edge of the assembly sits flat.
NOTE: One side edge of the rear panel lines up outside the side panel while the other lines up inside the side
panel.
flat
FRONT
rear panel shown in solid black
rear panel on OUTSIDE rear panel on INSIDE of
of left side panel right side panel
CONNECTION DETAIL
TOP VIEW
6