Pizzacraft PizzaQue PC7001 Owner's Manual page 12

Construct the charcoal fence. (1) Bend edge tab outward to expose u-channel and (2) slot flat edge into u-channel then
6.
(3) bend tab back over u-channel into original position to lock panels together. Repeat with only 3 of the 4 panels of
the charcoal fence until you've create a completely enclosed triangle.
recommended when assembling the charcoal fence, as the edges may be sharp.
u - channel
edge tab
(3)
bend edge tab back inward
to original position
COMPLETED 18.5" PIZZAQUE
12
flat edge
® PIZZA KIT ASSEMBLY. (Now go to step 7 for fitting instructions)
CAUTION: Wearing protective gloves is strongly
(1)
bend edge tab
outward
(2)
slot flat edge
into u-channel