Pizzacraft PizzaQue PC7001 Owner's Manual page 14

Depending on the brand and size of the kettle grill you are using, follow the appropriate instructions below to properly
8.
fit your grill hood onto your Pizza Kit safely and securely.
22.5" MASTERBUILT PRO:
SIDE VIEW
22.5" WEBER:
SIDE VIEW
14
Set the hood onto your Pizza Kit so that the back edge of the hood channel gets
pinched between the right angle face of the rear clip and rear panel (FIG.1). Check to
confirm your hood is stable before continuing, if not, re-adjust placement until stable.
Set the hood onto your Pizza Kit so that the top edge of the wire door frame seats into the channel on
the edge of the hood. Make sure the side edge of the hood rest in the side clip openings facing upward
(FIG.2). Check to confirm your hood is stable before continuing, if not, re-adjust placement until stable.
FIG. 1
right angle face
of rear clip
rear panel
FIG. 2
hood edge rests
on upward facing
side clips