Download Print this page

Operation; Transport; Storage; Maintenance And Care - Kärcher NT 611 Eco K User Manual

Hide thumbs

Advertisement

Operation

Danger
Risk of injury and damage! The socket out-
let is intended only for the direct connection
of the disposal pump. Any other use of the
socket outlet is not permitted.
Turning on the Appliance
 Plug in the mains plug of the appliance.
 Switch on the appliance at the main
switch.
 Continuously dispose of large volumes
of liquid: Switch on the disposal pump.
Disposal or cleaning operation
 Continuously dispose of liquids or
clean.
Filter dedusting
While vacuuming, clean the flat-fold filter at
regular intervals.
 Pull the handle of the filter clean-off out
several times and reinsert it.
Turn off the appliance
 Shut off the disposal pump if necessary.
 Switch off the appliance at the main
switch.
 Unplug the mains plug of the appliance.
After each operation
 Filter dedusting: Pull the handle out
several times and reinsert it.
 Empty the container.
 Vacuum and wipe the appliance inside
and outside with a damp cloth.
Storing the Appliance
 Wrap the mains connection cable
around the hooks on the slider.
 Wind the suction hose around the slid-
ing bow.
 Place the appliance in a dry room and
secure it from unauthorized use.
Caution
Risk of injury and damage! Observe the
weight of the appliance when you transport it.
 Remove the suction pipe with the floor
nozzle from the holder. Hold the appli-
ance at the handle and at the suction
pipe to transport it.
 When transporting in vehicles, secure
the appliance according to the guide-
lines from slipping and tipping over.
Caution
Risk of injury and damage! Note the weight
of the appliance in case of storage.
This appliance must only be stored in inte-
rior rooms.

Maintenance and care

Danger
First pull out the plug from the mains before
carrying out any tasks on the machine.
Replacing the coarse dirt filter/
flat-fold filter or the exhaust filter
 Open filter door.
 Replace the coarse dirt filter/flat-fold fil-
ter or the exhaust filter.
 Close the filter door, it must lock into
place.
Cleaning the floater
 Release and remove the suction head.
 Clean the floater with a moist cloth.
 Insert and lock the suction head.

Troubleshooting

Danger
First pull out the plug from the mains before
carrying out any tasks on the machine.
– 4
EN

Transport

Storage

17

Advertisement

loading