Two-Knife Trim Section - Canon Trimmer-A1 Operation Manual

Two-knife trim section

Introduction
Each booklet delivered from the upstream trimmer is trimmed along it's top and bottom. Then
the booklet is delivered to the conveyor section.
[1] Two-knife trim section
Main parts
Main parts
Part
A Top cover
B Handle
C Booklet transport unit (TF2) If a booklet jam occurs in the two-knife trim section, you
D Trim knives
E Transport belts
Canon Two-Knife Booklet Trimmer-A1
Operation Guide Two-Knife Booklet Trimmer-A1: VarioPRINT (VP) 110, VP120, VP135 - Edition 2013-06
Function
The top cover gives access to the trimmer.
The handle lifts the booklet transport unit (TF2).
must press the handle and lift the booklet transport unit
(TF2) to remove the jammed booklets.
How to open the booklet transport unit (TF2):
1. Press the handle to the left.
2. Lift the booklet transport unit (TF2) up.
The knives trim the top and bottom of each booklet.
The transport belts move the booklets.
Chapter 2 - Parts and their functions
Two-knife trim section
11