Canon Trimmer-A1 Operation Manual page 26

Overview of possible errors
Cause of error
A booklet jam has occurred in the two-knife
trim section.
A booklet jam has occurred at the exit of the
two-knife trim section.
* If the operator panel displays the message [Empty the two-knife trimmer waste box.] while the
delivery tray is not full, then trim waste may block the sensor.
26 Chapter 4 - Troubleshooting
Operation Guide Two-Knife Booklet Trimmer-A1: VarioPRINT (VP) 110, VP120, VP135 - Edition 2013-06
Solution
• Open the top cover (1).
• Open the F2 transport unit and remove the
jammed booklet.
• Reposition the F2 transport unit and close
the top cover (1) to restart the printing.
• Open the top cover (1).
• Open the F2 transport unit and remove the
jammed booklet.
• If necessary, also hold the E handle and lift
the conveyor.
• Reposition the E and F2 transport unit,
and close the top cover (1)) to restart print-
ing.
Canon Two-Knife Booklet Trimmer-A1