Outbound Filters - D-Link DSL-2770L User Manual

Section 3 - Configuration
The Outbound Filter option is an advanced method of controlling data sent out to the Internet. With this feature you can
configure outbound data filtering rules that control data based on an IP address range. Select whether to Allow all traffic
specified by your rules to pass, or to Deny all traffic specified by your rules.
Source IP:Ports:
Enter the starting IP address and ports from your network. Enter 0.0.0.0
if you do not want to specify an IP range.
Destination
Enter the ending IP address and ports outside your network. Enter
IP:Ports:
255.255.255.255 if you do not want to specify and IP range.
Enable:
Check this box to enable the rule.
Schedule Rule#:
Enter the schedule rule number that you want to apply to this port
forwarding rule. You can create a new schedule by clicking the Add.
New.Rule... button, or you can leave it blank to allow the rule to be
always on.
For more details on creating schedule rules, refer to "Schedules" on
page 85
D-Link DSL-2770L User Manual

Outbound Filters

66