Ethernet/3G Wan Interface - D-Link DSL-2770L User Manual

Section 3 - Configuration
If you clicked the Setup button for Ethernet/3G WAN Interface, you will see the following settings. You can click the Setup.Wizard.button to use
a step-by-step wizard that guides you through configuration of your WAN settings. If you are not sure what settings to use, please contact your
Internet Service Provider.
WAN Interface: Select the WAN interface to configure, and whether to enable or disable
it.
My Internet Select Static IP, DHCP, PPoE, PPTP, L2TP, or 3G(through a USB adapter).
Connection Is: Based on the setting you choose, the following settings will be different.
Host Name: Enter a host name to use for your connection.
The settings displayed in the middle will vary depending on what you select for the My.
Internet.Connection.Is setting. See the following pages for details.
Multicast: Select what multicast mode to use (Auto/IGMP v1/IGMP v2/IGMP v3),
or if you want to disable it.
IGMP Snooping: Check this box if you want to enable IGMP Snooping.
VLAN TAG: To set a VLAN tag, check this box, then enter the VLAN TAG to use.
D-Link DSL-2770L User Manual

Ethernet/3G WAN Interface

26