D-Link DSL-2770L User Manual page 69

Section 3 - Configuration
If you clicked on Wireless.QoS or LAN.QoS, you will see these settings.
If you want to create a compound rule(for TCPPORT, UDPPORT, or TOS
only), click the Add.A.Conjunction.(AND).Rule button.
Rule: Check the box if you want the rule to be enabled.
Class/Class Info:
Select what criteria the rule should apply to, and enter the relevant
criteria in the Class.Info text box.
•.IP: IP address
•.TCPPORT: TCP port
•.UDPPORT: UDP port
•.MAC: MAC address
•.DSCP: DSCP name
•.TOS: Type of service
Function/Function
Based on the Class selected, enter what you want the rule to apply to
data: and enter the relevant information in the Function.data text box. For
example, for TCPPORT, you should enter the TCP port the rule should
apply to.
•.PRI: Set priority level
•.MAXR: Set maximum bandwidth rate
•.MINR: Set minimum bandwidth rate
•.SESSION: Set connection session
•.DROP: Drop the packet
•.LOG: Log the event
•.ALERT: Create an alert event
Direction: Set which traffic direction the rule should apply to.
D-Link DSL-2770L User Manual 65