Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Allnet Manuals
  4. Switch
  5. ALL8089WPoE
  6. User manual

Allnet ALL8089WPoE User Manual

8 port web smart switch
Hide thumbs

Advertisement

Quick Links

Download this manual
ALL8089WPoE 8 Port Web Smart Switch – User's Manual
ALL8089WPoE
8 Port Web Smart Switch
User's Manual
ALLNET GmbH –
www.allnet.de

Advertisement

loading
Need help?

Need help?

Do you have a question about the ALL8089WPoE and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Allnet ALL8089WPoE

Summary of Contents for Allnet ALL8089WPoE

  • Page 1 ALL8089WPoE 8 Port Web Smart Switch – User’s Manual ALL8089WPoE 8 Port Web Smart Switch User’s Manual ALLNET GmbH – www.allnet.de...
  • Page 2 ALL8089WPoE 8 Port Web Smart Switch – User’s Manual Ver:1.3.3 Web Smart Switch Configure Please follow the steps to configure this Web Smart switch. Step 1: Use a twisted pair cable to connect this switch to your PC. Step 2: Set your PC’s IP to 192.168.2.xx.
  • Page 3 ALL8089WPoE 8 Port Web Smart Switch – User’s Manual Administrator: Authentication Configuration 1. Change the user name and the password. 2. Click “Update” to confirm the new change. Now, you can use the new user name and the password. ALLNET GmbH –...
  • Page 4 ALL8089WPoE 8 Port Web Smart Switch – User’s Manual Administrator: System IP Configuration Change the IP address: type the new IP address or select DHCP IP configuration. 2. Click “Update” to confirm the new change. “Update Successfully!!” will be shown on the screen.
  • Page 5 ALL8089WPoE 8 Port Web Smart Switch – User’s Manual Administrator: System Status MAC address and system version will be shown on the screen. 1. Change the new comment of this switch by typing the new comment. 2. Click “Update” to confirm the new change.
  • Page 6 ALL8089WPoE 8 Port Web Smart Switch – User’s Manual Administrator: Load Default Setting 1. Click “Load” to back to the factory default setting. **Note: Recover switch default setting excluding the IP address, User name and Password. Now, the default is loaded.
  • Page 7 ALL8089WPoE 8 Port Web Smart Switch – User’s Manual Administrator: Firmware Update Follow the instruction on the screen to update the new firmware. Please contact with your sales agents to get the latest firmware information. Administrator: Reboot Device 1. Click “Confirm” to reboot the device.
  • Page 8 ALL8089WPoE 8 Port Web Smart Switch – User’s Manual Port Management: Port Configuration Select the “Port No.” - configure the mode below: 1. “Auto” - enable/disable Auto-Negotiation. 2. “Speed” - 10M or 100M mode for the selected port. 2. “Duplex” - Full or Half-Duplex mode for the selected port.
  • Page 9 ALL8089WPoE 8 Port Web Smart Switch – User’s Manual Port Management: Port Mirroring Port Mirroring is used to mirror traffic, RX, TX or TX&RX, from Source port to Destination port for analysis. 1. Select the Destination port: you can choose port 1 to port 8 2.
  • Page 10 ALL8089WPoE 8 Port Web Smart Switch – User’s Manual Port Management: Bandwidth Control 1. Select the “Port No.”: you can choose port 1 to port 8 2. “TX Rate Value”: set the transmission rate of the selected port. (0:Full speed;...
  • Page 11 ALL8089WPoE 8 Port Web Smart Switch – User’s Manual Port Management: Broadcast Storm Control 1. “Threshold” - Set the threshold from 1~63. 2. “Enable Port” - per port to define the status of broadcast packets. 3. Click “Update” to confirm the setting.
  • Page 12 ALL8089WPoE 8 Port Web Smart Switch – User’s Manual Port Management: PoE Configuration by using Remote access and monitor the attached PD (Powered Device) status Enable/Disable function. 1. Enable: POE of the port is able to supply power to the attached PD (Powered Device) 2.
  • Page 13 ALL8089WPoE 8 Port Web Smart Switch – User’s Manual There are two VLAN modes : Port Based VLAN and Tagged VLAN. Click “Change VLAN mode” to select the mode. **If the Port Based VLAN function is enabled, Multi to 2 setting and tag Based VLAN will be disabled automatically.
  • Page 14 ALL8089WPoE 8 Port Web Smart Switch – User’s Manual VLAN Setting: VLAN Member Setting (Port Based) You can select a port group. 1. Click the port numbers: which you want to put them into the selected VLAN group. 2. Click “Update” to confirm and finish the setting.
  • Page 15 ALL8089WPoE 8 Port Web Smart Switch – User’s Manual This is a special design for easily setting the switch VLAN into “VLAN Per Port“. 1. Choose “Destination Port No”. 2. Choose “Disable Port” 3. “Disable Port” – choose the port which you don’t want to use 4.
  • Page 16 ALL8089WPoE 8 Port Web Smart Switch – User’s Manual QoS Setting: Priority Mode There are three Priority Modes to select. 1. “First-in-First-Service” - the first receiving packet will be firstly transmitted. 2. “All-High-before-Low” – All packets will be assigned to either high priority queue or low priority queue.
  • Page 17 ALL8089WPoE 8 Port Web Smart Switch – User’s Manual QoS Setting: Class of Service You can set QoS mode of per port by different bases. TCP/UDP > TP TPS/DS > 802.1P > Physical port 1. “TCP/UDP Port” – Q1 ~ Q4 options are effective for the selected physical port only.
  • Page 18 ALL8089WPoE 8 Port Web Smart Switch – User’s Manual 4. “Physical port” - you can select the port which you want to configure as Q1~Q4 priority. 5. Click “Update” to confirm and finish the setting. Now, the setting of “Class of Service” is finished.
  • Page 19 ALL8089WPoE 8 Port Web Smart Switch – User’s Manual Security: TCP_UDP Filter Configuration You can enable or disable this function of per port. If the “Function Enable” is “Enable”, please kindly check the following setting: 1. “Port Filtering Rule” –...
  • Page 20 ALL8089WPoE 8 Port Web Smart Switch – User’s Manual Spanning Tree: STP Bridge Settings This setting is to avoid the loop network. 1. Select the “STP Mode”- choose “Disable”, “STP” or “RSTP” 2. Set the “Bridge Priority” – Set the priority of the Bridge 3.
  • Page 21 ALL8089WPoE 8 Port Web Smart Switch – User’s Manual Spanning Tree: STP Port Settings 1. Choose “Port No.” : Port 1 ~ Port 8 2. Choose “Priority”: 0~ 240 3. “RPC” = Root Path Cost: 0 = AUTO. When the loop is found, the STP/RSTP will calculate the cost of its path.
  • Page 22 ALL8089WPoE 8 Port Web Smart Switch – User’s Manual Trunking: Link Aggregation Settings There are two groups to choose and max. for each group is 4 ports. Click “Submit” to confirm and finish the setting. “State” – Enable / Disable “Type”...
  • Page 23 ALL8089WPoE 8 Port Web Smart Switch – User’s Manual Backup/Recovery Follow the instruction on the screen to update the original setting. “Backup” - Click “Download” to confirm the setting. “Recovery” – select a file and key in the password Click “Update”...
  • Page 24 ALL8089WPoE 8 Port Web Smart Switch – User’s Manual Miscellaneous: Miscellaneous Setting 1. “Output Queue Aging Time” - You can set queue aging time into different milliseconds or disable this function. 2. “VLAN Striding” – You can enable/disable this function.
  • Page 25 ALL8089WPoE 8 Port Web Smart Switch – User’s Manual 10.03.2010 EC – Declaration of conformity For the following product ALL8089WPoE 8 Port 10/100TX Desktop Web managed This device complies with the essential requirements of the EMC Directive 2004/108/EC as amended by Directives 92/31 EEC and 93/68/EEC with CE marking requirement.
  • Page 26 ALL8089WPoE 8 Port Web Smart Switch – User’s Manual Copyright © 2010. All rights reserved. No part of this document may be reproduced, republished, or retransmitted in any form or by any means whatsoever, whether electronically or mechanically, including, but not limited to, by way of photocopying, recording, information recording, or through retrieval systems without the express written permission of the owner.