Allnet ALL-SG8428PM User Manual

Allnet ALL-SG8428PM User Manual

24x port gigabit poe + 4 combo port managed switch
Table of Contents

Advertisement

ALL-SG8428PM
24x Port Gigabit PoE + 4 Combo Port Managed Switch

User Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ALL-SG8428PM and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Allnet ALL-SG8428PM

  • Page 1: User Manual

    ALL-SG8428PM 24x Port Gigabit PoE + 4 Combo Port Managed Switch User Manual...
  • Page 2 Default-IP 192.168.2.1 Username & Password: admin © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted...
  • Page 3: Table Of Contents

    6.1 Global Setting ····································································································· 33 6.2 Priority Setting ···································································································· 34 6.3 Power Limit ········································································································· 35 6.4 PoE ON/OFF ········································································································· 37 Chapter 7 VLAN ····································································································· 38 7.1 VLAN ··················································································································· 38 © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted...
  • Page 4 12.3.1 Method List ···································································································· 73 12.3.2 Login Authentication ···················································································· 74 12.4 Management Access ························································································· 74 12.4.1 Management VLAN ······················································································· 74 12.4.2 Management Service ····················································································· 75 12.5 Authentication Manager ················································································· 76 © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted...
  • Page 5 15.3.1 Upgrade / Backup ························································································ 106 15.3.2 Save Configuration ······················································································ 108 15.4 SNMP ··············································································································· 109 15.4.1 Community ·································································································· 109 15.4.2 Trap Event ···································································································· 110 15.4.3 Notification ·································································································· 111 Product Specifications ···························································································· 112 © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted...
  • Page 6: Chapter 1 Introduction

    Sending or receiving data. Port disconnected or link fail. Steady Green PoE power output on. PoE power output off. Blinking Green PoE power output over >30W (No Powering) © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted...
  • Page 7: The Rear Panel

    1000 Base-T: 4-pair UTP/STP Cat. 5 cable, EIA/TIA-568 100-ohm (Max. 100m) PoE: To deliver power without problems, the Cat 5e and Cat 6 cable is suggested. The high quality Ethernet cable reduces the lost while power transmission. © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted...
  • Page 8 Attach the brackets to the device by using the screws provided in the Rack Mount kit. Mount the device in the 19-inch rack by using four rack-mounting screws provided by the rack manufacturer. © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted...
  • Page 9: Chapter 2 Getting Started

    Chapter 2 Getting Started 2.1 Preparation for Web Interface The web management page allows you to use a standard web-browser such as Microsoft Internet Explorer, Google Chrome or Mozilla Firefox, to configure and interrogate the switch from anywhere on the network. Before you attempt to use the web user interface to manage switch operation, verify that your switch is properly installed on your network and that every PC on this network can access the switch via the web browser.
  • Page 10: The Graphic User Interface

    After the password authorization, the System page shows up. You may click on each folder on the left column of each page to get access to each configuration page. The Graphic User Interface is as follows: © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted...
  • Page 11 Rate Limit – Ingress/Egress Port, Egress Queue Logging – Property, Remove Server Mirroring Diagnostics Ping Copper Test User Account Management Firmware – Upgrade/Backup, Active Image Configuration – Upgrade/Backup, Save Configuration © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted...
  • Page 12 SNMP – Community, Trap Event © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted...
  • Page 13: Chapter 3 Status

    SNMP system object ID System Uptime Total elapsed time from booting Current Time Current system time Loader Version Boot loader image version Loader Date Boot loader image build date © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted...
  • Page 14: Logging Message

    This page shows logging messages stored on the RAM and Flash. Field Description The logging view including: Viewing RAM: Show the logging messages stored on the RAM Flash: Show the logging messages stored on the Flash. © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted...
  • Page 15: Port

    Ethernet-like and RMON MIB. Interfaces and Ethernet-like counters display errors on the traffic passing through each port. RMON counters provide a total count of different frame types and sizes passing through each port. © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted...
  • Page 16: Bandwidth Utilization

    Click Status > Port > Bandwidth Utilization This page allow user to browse ports’ bandwidth utilization in real time. This page will refresh automatically in every refresh period. © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted...
  • Page 17: Link Aggregation

    Click Status > Link Aggregation Display the Link Aggregation status of web page. Field Description LAG Name. Name LAG port description Type The type of the LAG © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted...
  • Page 18: Mac Address Table

    Static: Manually configured by administrator. Dynamic: Auto learned by hardware. The type of port Port CPU : DUT’s CPU port for management purpose Other : Normal switch port © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted...
  • Page 19: Chapter 4 Network

    192.168.2.1. The subnet mask specifies the network number portion of an IP address. The factory default subnet mask is 255.255.255.0. Field Description IPv4 Address Field © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted...
  • Page 20: System Time

    This page allow user to set time source, static time, time zone and daylight saving settings. Time zone and daylight saving takes effect both static time or time from SNTP server. © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted...
  • Page 21 Select the mode of daylight saving time. None: Disable daylight saving time. Type Recurring: Using recurring mode of daylight saving time. Non-Recurring: Using non-recurring mode of daylight saving © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted...
  • Page 22 Non-recurring From This field available when selecting “Non-Recurring” mode. Specify the ending time of non-recurring daylight saving time. This Non-recurring To field available when selecting “Non-Recurring” mode. © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted...
  • Page 23: Chapter 5 Port

    Up: Port is link up. Down: Port is link down. Speed Current port speed configuration and link speed status. Duplex Current port duplex configuration and link duplex status. © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted...
  • Page 24 ‧10M: Force speed with 10M ability. ‧100M: Force speed with 100M ability. ‧1000M: Force speed with 1000M ability Port duplex capabilities ‧Auto: Auto duplex ability. Duplex ‧Full: Force Full ability. © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted...
  • Page 25: Link Aggregation

    LACP: The group of ports assigned to dynamic LAG are candidate ports. LACP determines which candidate ports are active member ports. LAG port link status. Link Status Active Member Active member ports of the LAG. © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted...
  • Page 26: Port Setting

    Select available port to be LAG group member port. 5.2.2 Port Setting Click Port > Link Aggregation > Port Setting This page shows LAG port current status and allows user to edit LAG port configurations. © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted...
  • Page 27 Flow Control status. Select Port Setting Table and click “Edit” button to edit port setting. Edit LAG Port Setting Field Description Selected port list Port Port description Description © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted...
  • Page 28: Lacp

    ‧Enabled: Enable flow control ability. ‧Disabled: Disable flow control ability. 5.2.3 LACP Click Port > Link Aggregation > LACP This page allow user to configure LACP global and port configurations. © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted...
  • Page 29 Long: Transmit LACP PDU with slow periodic (30s). Timeout Short: Transmit LACP PDU with fast periodic (1s). Select ports and click “Edit” button to edit port configuration. Edit LACP Port Setting © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted...
  • Page 30: Eee

    Short: Transmit LACP PDU with fast periodic (1s). 5.3 EEE Click Port > EEE This page allows user to enable or disable EEE (Energy Efficient Ethernet) function. © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted...
  • Page 31: Jumbo Frame

    When jumbo frame is enabled, switch max frame size is allowed to Jumbo Frame configure. (from 1518 to 10000) When jumbo frame is disabled, default frame size 1522 will be © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted...
  • Page 32 © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted...
  • Page 33: Chapter 6 Poe

    Click PoE > Global Setting This page allows user to configure PoE schedule. Field Description Nominal Power The PoE budge for this PoE switch. Consuming Power The consuming power. © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted...
  • Page 34: Priority Setting

    Set the date and time for this PoE schedule. Select the ports in this PoE schedule. Port List 6.2 Priority Setting Click PoE > Priority Setting This page allows user to configure PoE priority. © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted...
  • Page 35: Power Limit

    •High: Sets the PoE priority level as high. •Critical: Sets the PoE priority level as critical. 6.3 Power Limit Click PoE > Power Limit This page allows user to configure Power limit. © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted...
  • Page 36 Select Port Limit Table and click “Edit” button to edit Power Limit. Edit power limit Field Description Port List Port Name. Sets the maximum amount of power that can be delivered in this Power Limit port. © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted...
  • Page 37: Poe On/Off

    Click PoE > PoE ON/OFF This page allows user to turn on/off PoE function per port. Field Description PoE ON/OFF Check to enable PoE function. Uncheck to disable PoE function. © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted...
  • Page 38: Chapter 7 Vlan

    VLAN had been created. Created VLAN Select created VLANs from right box then move to left box to delete. Click “Edit” button to edit VLAN name © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted...
  • Page 39: Vlan Configuration

    Input VLAN name. 7.1.2 VLAN Configuration Click VLAN > VLAN > VLAN Configuration This page allow user to configure the membership for each port of selected VLAN. © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted...
  • Page 40: Membership

    Display if it is PVID of interface. 7.1.3 Membership Click VLAN > VLAN > Membership This page allow user to view membership information for each port and edit membership for specified interface. © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted...
  • Page 41 Display the operational VLAN list of this port. Operational VLAN Operational VLAN means the VLAN status that really runs in device. It may different to administrative VLAN. Click “Edit” button to edit VLAN membership © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted...
  • Page 42: Port Setting

    Click VLAN > VLAN > Port Setting This page allows user to configure port VLAN settings such as VLAN port mode, PVID etc. The attributes depend on different VLAN port mode. © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted...
  • Page 43 Display the Port-based VLAN ID of port. Accept Frame Type Display accepted frame type of port. Display ingress filter status of port. Ingress Filtering Click “Edit” button to edit VLAN port setting © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted...
  • Page 44: Voice Vlan

    7.2 Voice VLAN 7.2.1 Property Click VLAN > Voice VLAN > Property This page allows user to configure global and per interface setting of voice VLAN. © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted...
  • Page 45 Input value of aging time. Default is 1440 minutes. A voice VLAN Aging Time entry will be age out after this time if without any packet pass through. Field Description Display port entry Port © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted...
  • Page 46: Voice Oui

    7.2.2 Voice OUI Click VLAN > Voice VLAN > Voice OUI This page allow user to add, edit or delete OUI MAC addresses. Default has 8 pre-defined OUI MAC. © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted...
  • Page 47 Click “Add” or “Edit” buttons to edit Voice OUI. Field Description Input OUI MAC address. Can’t be edited in edit dialog. Input description of the specified MAC address to the voice VLAN Description OUI table. © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted...
  • Page 48: Chapter 8 Mac Address Table

    MAC Address The MAC address to which packets will be statically fowarded. Specify the VLAN to show or clear MAC entries. VLAN Port Interface or port number. © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted...
  • Page 49: Chapter 9 Spanning Tree

    © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted...
  • Page 50: Port Setting

    Numbers of the topology changes. Count Last Topology The last time for the topology change. Change 9.2 Port Setting Click STP > Port Setting Configure and display STP port settings. © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted...
  • Page 51 Enable/Disable the STP on the specified port Path Cost Specify the STP path cost on the specified port. Priority Specify the STP priority on the specified port. Edge Port Specify the edge mode. © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted...
  • Page 52: Statistics

    2 network, only one path can be taken. © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted...
  • Page 53 Transmit BPDU The counts of the transmitted TCN BPDU. (TCN) Field Description Clear the statistics for the selected interfaces. Clear View View the statistics for the interface. © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted...
  • Page 54 View STP Port Statistics. Field Description Refresh Rate The option to refresh the statistics automatically. Clear Clear the statistics for the selected interfaces. © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted...
  • Page 55: Chapter 10 Discovery

    Reinitialization Select the delay before a re-initialization (range 1~10 seconds, default=2). Delay Select the delay after an LLDP frame is sent (range 1~8191 seconds, Transmit Delay default=3). © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted...
  • Page 56: Port Setting

    To Edit LLDP port setting web page, select the port which to set, click button Edit. Field Description Port Select specified port or all ports to configure LLDP state. © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted...
  • Page 57: Packet View

    Select the VLAN Name ID to be carried (multiple selection is 802.1 VLAN Name allowed) 10.1.3 Packet View Click Discovery > LLDP > Packet View To display LLDP Overloading. © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted...
  • Page 58: Local Information

    Total number of bytes of LLDP information in each packet. 10.1.4 Local Information Click Discovery > LLDP > Local Information To display LLDP Local Device. Use the LLDP Local Information to view LLDP local device information. © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted...
  • Page 59 Type of the port identifier that is shown. LLDP Tx and Rx abilities. LLDP Status Click “Detail” button on the page to view detail information of the selected port. © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted...
  • Page 60: Neighbor

    To display LLDP Statistics status. The Link Layer Discovery Protocol (LLDP) Statistics page displays summary and per-port information for LLDP frames transmitted and received on the switch. © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted...
  • Page 61 MSAP could not be entered into tables associated with the remote systems because of insufficient resources. The number of times the complete set of information advertised by Age Outs © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted...
  • Page 62 LLDP agent on the corresponding port. Receive TLV Number of TLVs of LLDP frames that are unrecognized while the LLDP agent is enabled. Unrecognized Neighbor Timeout Number of age out LLDP frames. © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted...
  • Page 63: Chapter 11 Multicast

    Click Multicast > General > Group Address To display Multicast General Group web page. This page allow user to browse all multicast groups that dynamic learned or statically added. © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted...
  • Page 64: Igmp Snooping

    Selected Port: Selected port member 11.2 IGMP Snooping Use the IGMP Snooping pages to configure setting of IGMP snooping function 11.2.1 Property Click Multicast > IGMP Snooping > Property © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted...
  • Page 65 Leave Group message for a group. Interval The immediate leave status of the group will immediate leave Immediate Leave when receive IGMP Leave message. Click “Edit” to edit VLAN Setting. © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted...
  • Page 66 Group-Specific Queries when it receives a Leave Group message for Interval a group. Operational Status. Field Description Operational IGMP Snooping status, must both IGMP Snooping Status global and IGMP Snooping enable the status will be enable. © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted...
  • Page 67: Querier

    Querier Version The IGMP Snooping querier operational version. The operational querier IP address on the VLAN. Querier IP Click “Edit” to edit IGMP Snooping Querier. Field Description © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted...
  • Page 68: Statistics

    IGMP join and report packet. General Query IGMP general query packet Special Group IGMP special group general query packet Query Source-specific IGMP special source and group general query packet Group Query © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted...
  • Page 69 Special Group IGMP special group query packet include querier transmit special Query group query packet. Source-specific IGMP special source and group general query packet. Group Query © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted...
  • Page 70: Chapter 12 Security

    Enter the Key String used for encrypting all Radius communication Key String between the device and the Radius server. Click “Add” or “Edit” to add or edit RADIUS server. © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted...
  • Page 71: Tacacs

    Terminal Access Controller Access-Control System Plus (TACACS+) is a protocol developed by Cisco. TACACS+ handles authentication, authorization, and accounting (AAA) services. This page allows user to set up TACACS+ server. © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted...
  • Page 72 TACACS+ server. Enter the amount of time the device waits for an answer from the Timeout TACACS+ Server before switching to the next server. The default © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted...
  • Page 73: Aaa

    12.3.1 Method List Click Security >AAA > Method List This page allows user to change Method List. Click “Add” or “Edit” to add or edit Method List. © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted...
  • Page 74: Login Authentication

    Use the Management Access pages to configure setting of management access. 12.4.1 Management VLAN Click Security > Management Access > Management VLAN This page allow user to change Management VLAN connection. © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted...
  • Page 75: Management Service

    VLAN of management VLAN are allow connecting to device. Others will be dropped. 12.4.2 Management Service Click Security > Management Access > Management Service This page allow user to change management services related configurations. © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted...
  • Page 76: Authentication Manager

    Set silent time for user access to user interface. Silent Time 12.5 Authentication Manager 12.5.1 Property Click Security > Authentication Manager > Property This page allows user to change Authentication Type and Property. © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted...
  • Page 77 Select the ports in Port Mode Table and click “Edit” to edit Property. © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted...
  • Page 78: Port Setting

    12.5.2 Port Setting Click Security > Authentication Manager > Port Setting This page allows user to change Port Setting. © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted...
  • Page 79: Sessions

    Select the ports in Port Setting Table and click “Edit” to edit Port Setting. 12.5.3 Sessions Click Security > Authentication Manager > Sessions This page allows user to monitor Sessions. © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted...
  • Page 80: Protected Port

    Field Description Port Port Name Port protected admin state. Protected: Port is protected. State Unprotected: Port is unprotected. Click “Edit” to edit the protected port. © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted...
  • Page 81: Storm Control

    Port protected admin state. State Protected: Enable protecting function. Unprotected: Disable protecting function. 12.7 Storm Control Click Security > Storm Control To display Storm Control global setting web page. © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted...
  • Page 82 Included: include preamble & IFG (20 bytes) when count ingress storm control rate. Click “Edit” to edit the storm control port setting web page. © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted...
  • Page 83: Dos

    The DoS protection feature is a set of predefined rules that protect the network from malicious attacks. The DoS Security Suite Setting enables activating the security suite. © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted...
  • Page 84: Property

    TCP SYN-RST Attack Drops the packets with SYN and RST bits set. ICMP Fragment Drops the fragmented ICMP packets. TCP-SYN(SPORT Drops SYN packets with sport less than 1024. © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted...
  • Page 85: Port Setting

    323 bytes, and default length is 0 bytes. 12.8.2 Port Setting Click Security > DoS > Port Setting To configure and display the state of DoS protection for interfaces. © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted...
  • Page 86 Field Description Port Interface or port number. State Enable/Disable the DoS protection on the interface. © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted...
  • Page 87: Chapter 13 Qos

    13.1 General Use the QoS general pages to configure setting for general purpose. 13.1.1 Property Click QoS > General > Property To display QoS property web page. © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted...
  • Page 88 VLAN tag, or based on the per-port default CoS value (if there is no VLAN tag on the incoming packet), the actual mapping of the CoS to queue can be configured on port setting dialog. © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted...
  • Page 89 Set checkbox to enable/disable port CoS remarking. Remarking (DSCP) Set checkbox to enable/disable port DSCP remarking. Remarking (IP Set checkbox to enable/disable port IP Precedence remarking. Precedence) © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted...
  • Page 90: Queue Scheduling

    Set queue to strict priority type Set queue to Weight Round Robin type. Weight If the queue type is WRR, set the queue weight for the queue. © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted...
  • Page 91: Cos Mapping

    Description Queue Queue ID Select CoS value for the queue ID. 13.1.4 DSCP Mapping Click QoS > General > DSCP Mapping To display DSCP Mapping web page. © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted...
  • Page 92: Ip Precedence Mapping

    Click QoS > General > IP Precedence Mapping To display IP Precedence Mapping web page. This page allow user to configure IP Precedence to Queue Mapping and Queue to IP Precedence Mapping. © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted...
  • Page 93: Rate Limit

    This page allow user to configure ingress port rate limit and egress port rate limit. The ingress rate limit is the number of bits per second that can be received from the ingress interface. Excess bandwidth above this limit is discarded. © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted...
  • Page 94 Enable: Egress rate limit is enabled. Disable: Egress rate limit is disabled. Egress (Rate) Port egress rate limit value if egress rate state is enabled. Click “Edit” to edit Ingress/Egress Port. © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted...
  • Page 95: Egress Queue

    To display Egress Queue web page. Egress rate limiting is performed by shaping the output load. Field Description Port name Port Queue 1 (State) Port egress queue 1 rate limit state. © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted...
  • Page 96 Enable: Egress queue rate limit is enable. Disable: Egress queue rate limit is disable. Queue 8 (CIR) Queue 8 egress committed information rate. Click “Edit” to edit Egress Queue © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted...
  • Page 97 Set checkbox to enable/disable egress queue 8 rate limit. If egress Queue 8 rate limit is enabled, rate limit value need to be assigned. © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted...
  • Page 98: Chapter 14 Diagnostics

    The minimum severity for the console logging. RAM Logging Field Description Enable/Disable the RAM logging service. State Minimum Severity The minimum severity for the RAM logging. Flash Logging Field Description © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted...
  • Page 99: Remote Server

    Notice: System is functioning properly, but a system notice has occurred. Informational: Device information. Debug: Provides detailed information about an event. 14.2 Mirroring Click Diagnostics > Mirroring To display the Port Mirroring web page. © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted...
  • Page 100: Ping

    Select mirror session source RX ports. Ingress Port Egress Port Select mirror session source TX ports. 14.3 Ping Click Diagnostics > Ping To display the Diagnostic Ping functionality web page. © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted...
  • Page 101: Copper Test

    Specify the Hostname/IPv4/IPv6 address for the remote logging Server Address server. Count Specify the numbers of each ICMP ping request. 14.4 Copper Test Click Diagnostics > Copper Test To test the copper length diagnostic. © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted...
  • Page 102 Impedance Mismatch: Terminating impedance is not in the reference range. Distance in meter from the port to the location on the cable where Length the fault was discovered. © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted...
  • Page 103: Chapter 15 Management

    Admin: Allow to change switch settings. Privilege value equals to Privilege User: See switch settings only. Not allow to change it. Privilege level equals to 1. Click “Add” or “Edit” to add/edit User Account. © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted...
  • Page 104: Firmware

    Click Management > Firmware > Upgrade/Backup To display the Firmware Upgrade or Backup web page. This page allow user to upgrade or backup firmware image through HTTP or TFTP server. © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted...
  • Page 105 Method TFTP: Using TFTP to upgrade/backup firmware. HTTP: Using WEB browser to upgrade/backup firmware. Select which image file to backup. Firmware Image0: backup image0. Image1: backup image1. © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted...
  • Page 106: Active Image

    Click Management > Configuration > Upgrade/Backup To display the Configuration Upgrade or Backup web page. This page allow user to upgrade or backup configuration file through HTTP or TFPT server. © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted...
  • Page 107 Backup Configuration: Replace the backup configuration file. Specify TFTP server address type Hostname: Use domain name as server address. Address Type IPv4: Use IPv4 as server address IPv6: Use IPv6 as server address © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted...
  • Page 108: Save Configuration

    To display the Save Configuration web page. This page allow user to manage configuration file saved on DUT and click “Restore Factory Default” button to restore factory defaults. © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted...
  • Page 109: Snmp

    Destination File Startup Configuration: Save file as startup configuration. 15.4 SNMP 15.4.1 Community Click Management > SNMP > Community To display and configure the SNMP community settings. © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted...
  • Page 110: Trap Event

    To display and configure the SNMP trap event. Field Description Authentication SNMP authentication failure trap, when community not match or user authentication password not match. Failure Link Up/Down Port link up or down trap. © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted...
  • Page 111: Notification

    SNMPv2: SNMP Version 2 notification. Notification Type Type Trap: Send SNMP traps to the host. Inform: Send SNMP informs to the host. SNMP community name for notification. Community © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted...
  • Page 112: Product Specifications

    IP filtering DoS prevention Loop Prevention STP (IEEE 802.1d) Layer 2 Multicast: IGMP snooping (v1, v2) IPv6: IPv6 over Ethernet (RFC 2464) Dual-stack (RFC 4213) ICMPv6 (RFC 4884) © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted...
  • Page 113 441 x 270 x 45 mm (L x W x H) Weight 4.35Kg Temperature Operating: 0 ~ 40℃ Storage: -40 ~ 70℃ Humidity Operating: 10% ~ 90% RH (non-condensing) Storage : 5% ~ 90% RH (non-condensing) © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted...
  • Page 114: Safety Warnings

    Compliance FCC Class A, CE ALLNET GmbH Computersysteme declares that the device ALL-SG8428PM is in compliance with the essential requirements and other relevant provisions of Directive 2004/108/EC or 2014/30/EU. The Declaration of conformity can be found under this link: www.allnet.de/downloads.html...
  • Page 115 Written Offer for Source Code For binaries that you receive from ALLNET GmbH Computersysteme on physical media or within the download of the offered firmware that are licensed under any version of the GNU General Public License (GPL) or the GNU LGPL, you can receive a...
  • Page 116 Your request should include: (i) the name of the covered binary, (ii) the version number of the ALLNET product containing the covered binary, (iii) your name, (iv) your company name (if applicable) and (v) your return mailing and email address (if available).
  • Page 117 (or else, saying that you provide a warranty) and that users may redistribute the program under these conditions, and telling the user how to view a copy of this License. (Exception: if © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted...
  • Page 118 Program or its derivative works. These actions are prohibited by law if you do not accept this License. Therefore, by modifying or distributing the Program (or any work based on the Program), you indicate © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted...
  • Page 119 Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally. NO WARRANTY © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted...
  • Page 120 Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'. This is free software, and you are welcome to redistribute it under certain conditions; type `show c' for details. © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted...
  • Page 121 To protect your rights, we need to make restrictions that forbid distributors to deny you these rights or to ask you to surrender these rights. These restrictions translate to certain responsibilities for you if you distribute copies of the library or if you modify it. © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted...
  • Page 122 "work based on the library" and a "work that uses the library". The former contains code derived from the library, whereas the latter must be combined with the library in order to run. GNU LESSER GENERAL PUBLIC LICENSE © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted...
  • Page 123 These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Library, and can be reasonably considered independent and separate works in themselves, then this License, and its © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted...
  • Page 124 (ten lines or less in length), then the use of the object file is unrestricted, regardless of whether it is legally a derivative work. (Executables containing this object code plus portions of the Library will still fall under Section 6.) © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted...
  • Page 125 License, and distribute such a combined library, provided that the separate distribution of the work based on the Library and of the other library facilities is otherwise permitted, and provided that you do these two things: © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted...
  • Page 126 13. The Free Software Foundation may publish revised and/or new versions of the Lesser General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted...
  • Page 127 This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option) any later version. © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted...
  • Page 128 Yoyodyne, Inc., hereby disclaims all copyright interest in the library `Frob' (a library for tweaking knobs) written by James Random Hacker. <signature of Ty Coon>, 1 April 1990 Ty Coon, President of Vice That's all there is to it! © ALLNET GmbH Computersysteme 2017 - All rights reserved Errors and omissions excepted...

Table of Contents