Allnet ALL8808POE Manual
  1. Manuals
  2. Brands
  3. Allnet Manuals
  4. Switch
  5. ALL8808POE
  6. Manual

Allnet ALL8808POE Manual

8 port gigabit poe+
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
ALL8808POE
8 Port Gigabit PoE+ Switch
Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ALL8808POE and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Allnet ALL8808POE

Summary of Contents for Allnet ALL8808POE

  • Page 1 ALL8808POE 8 Port Gigabit PoE+ Switch Manual...

  • Page 2: Fcc Certifications

    FCC Certifications This Equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.

  • Page 3: Ce Mark Warning

    Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received;...
  • Page 4 products and it may be possible that information in this document is not up-to-date. Please check with your local distributors for the latest information. No part of this document can be copied or reproduced in any form without written consent from the company. Trademarks: All trade names and trademarks are the properties of their respective companies.

  • Page 5: Unpacking Information

    Unpacking Information Thank you for purchasing this product. Before installation, please verify that your package contains the following items. One 8-port Gigabit Ethernet with 8-port PoE+ Desktop Unmanaged Switch 2. 1* AC power cord 3. Rubber feet and screws 4. User’s Manual 5.
  • Page 6 networks into smaller, connected subnets for improved performance, enabling the bandwidth demanding multimedia and imaging applications. Moreover, the 10/100/1000Mbps auto-sensing ability provides an easy way to migrate 10/100Mbps to 1000Mbps network with no pain. This switch supports PoE, which supplies power for connected devices via CAT 5 and above twisted cables.
  • Page 7 Key Features  Complies with 10BASE-T specifications of the IEEE802.3 standard  Complies with 100BASE-TX specifications of the IEEE802.3u standard  Complies with 1000BASE-T specifications of the IEEE802.3ab standard  Compliant with IEEE 802.3af/at PoE standard (DTE power via MDI) ...
  • Page 8  Provide 8* 10/100Mbps auto-detect （half/full） and 1000Mbs full duplex switch ports (IEEE802.3/ 802.3u/ 802.3ab)  Supports MDI/MDI-X auto crossover  Supports 136W Max; Full load: 31.5W(at) x 4P + 5W = 131W ; 15.4W(af) x 8P + 5W = 128.2W ...
  • Page 9 The Front Panel The front panel consists of LED indicators and the ports. For detailed LED definition, please refer to the next paragraph. The front panel of the switch is shown as below: LED Definition The switch contain 1* power LED and 1* loop LED for the device, 1* PoE LED for each port and 1* Link/Act LED for each port.

  • Page 10: The Rear Panel

    Status Operation Steady Green The switch is powered on Power The switch is powered off Blinking Red There is a loop existing Loop There is no loop existing Port LED The switch provides one “Link/ACT” LED and one PoE LED for each port. Status Operation Steady Green...

  • Page 11: Installation

    Power Receptacle To be compatible with the electric service standards around the world, the switch is designed to afford the power supply in the range from 100 to 240VAC, 50/60Hz. Please make sure that your outlet standard to be within this range. To power on the switch, plug the female end of the power cord firmly into the receptacle of the switch and the other end into an electric service outlet.
  • Page 12 unit is recommended. The switch and the relevant components are away from sources of electrical noise such as radios, transmitters and broadband amplifiers. The switch is away from environments beyond recommend moisture. Desktop Installation Attach the provided robber feet to the bottom of the switch to keep the switch from slipping.
  • Page 13 Rack-mount Installation Rack mounting facilitate to an orderly installation when series of networking devices being installed. The switch is supplied with rack mounting brackets and screws for rack mounting the unit. Procedures to Rack-Mount the Switch in the rack: Disconnect all the cables from the switch before continuing.
  • Page 14 Reconnect all the cables. Network Cables Installation Procedures to Rack-Mount the Switch in the rack: Crossover or straight-through cable: All the ports on the switch support Auto-MDI/MDI-X functionality. Both straight-through or crossover cables can be used to connect the switch with PCs as well as other devices like switches, hubs or router.
  • Page 15 Media Speed Wiring 10 Mbps Category3,4,5 UTP/STP 10/100/1000 100 Mbps Category 5 Mbps ports UTP/STP 1000 Mbps Category 5e, 6 UTP/STP Ports that 10/100/1000 Category5,5e,6 support PoE Mbps UTP/STP or (Port 1~Port8) above...

  • Page 16: Product Specifications

    Product Specifications IEEE802.3 10BASE-T IEEE802.3u 100BASE-TX IEEE802.3ab 1000BASE-T Standard IEEE 802.3af/at PoE standard (DTE power via MDI) IEEE802.3x flow control 8 * 10/100/1000 Mbps auto Interface MDI/MDI-X RJ-45 ports (Port 1~8 support PoE power feeding) Network Data 10/100/1000Mbps Auto-negotiation Rate Transmission 10/100Mbps: Full-duplex, Half-duplex Mode...

Table of Contents