Transition
Transition Panel
The Transition panel allows the user to bring the selected Preset source to the Program output. The SE-1200 MU
user may determine to use either one of the Mix, WIPE, Cut and AUTO transitions. In order to use these transition
options, the BGND (Background) button on the TRANSITION CONTROLS panel needs to be enabled (backlit green).
Transition Modes
Previewing a selected transition
It is possible to see or test the effect of a selected transition in the Preview Monitor before applying it to the
Program output.
Once the Pvw button (TRANSITION CONTROLS panel) is ON (backlit Green), select and apply the transition that you
want to test on the Preview monitor. You will also notice that the Preview Monitor switches to the currently
selected Program source when the Pvw button (TRANSITION CONTROLS panel) is turned on. Do not worry as the
selected Preset source has not changed. Click the Auto button (TRANSITION panel) or move the T-Bar manually to
preview the selected transition.
NOTE: Remember to disable the Pvw button (TRANSITION CONTROLS panel) before attempting to use the
selected transition on the Program output.
Mix Button
The Mix button is selected when a dissolve or fade transition between the selected
Program and a Preset source is required. This Mix transition is generated by moving the
T-Bar manually or clicking the Auto button.
Wipe Button
The Wipe button is selected when a wipe effect transition between the selected
Program and a Preset source is required. This WIPE effect is generated by moving the T-
Bar manually or by clicking the Auto button.
Cut Button
The Cut button is used to instantaneously switch between the currently selected
Program and a Preset source.
Auto Button
Instead of using the manually operated T-Bar, the Auto button is used to automatically
transition between the selected Program and a Preset source over a set period.
58