Table of Contents
Advertisement
Wipe
To select a WIPE, click Wipe located at the bottom left hand corner and then enter a wipe number using the on-
screen keypad. The current or selected WIPE will be highlighted by a yellow border around it.
Soft Value
This value softens the leading and trailing edge (A+C) of the wipe as shown in the diagram below. A low value
yields a sharp or hard wipe edge. A large value yields a softer or diffused wipe edge.
Wipe Border
This option enables/disables Wipe Border.
Width Value
This value determines how wide the actual wipe effect is. A low value makes a narrow wipe (A and C move
closer together). A large value makes a wider wipe (A and C move further apart). A value of 10 would be the wipe
being 10% of the width of the screen.
Level Value
This value relates to how far the wipe has travelled across the screen and changes as the T-Bar is moved or
the AUTO TRANS feature progresses.
Wipe Border
The Wipe Border parameters and the values are currently shown along the bottom of the display below. This
feature allows the user to configure the Wipe Border Matte.
27
Hide quick links:
Advertisement
Table of Contents
