Freeze - Still - Datavideo SE-1200MU Quick Start Manual

4. The Freeze Mode located at the bottom right of the screen can be set to a full frame or one field.
Note: Remember to turn the Freeze function off after you have finished using it.
Freeze – Still
Please refer to the example below if you would like to set the input channel source to the still picture.
1. Click the Stills button on the MENU SELECT panel.
2. Click "Still Load", and then select Input 1 for the Still Buf and enter 0 for the Still as shown in the diagram
below
3. Click the Freeze button on the MENU SELECT panel
47