Grab And Save; Delete - Datavideo SE-1200MU Quick Start Manual

Grab and Save

The Grab & Save feature of the SE-1200 MU allows the user to create new Still Images of the current Program
video image and save the grabbed image to the internal stills buffer of the SE-1200 MU.

Click "Grab Still" to grab Program Output to a Still buffer

View the Multi Image Preview and decide if the grabbed still should be saved

To Save a Still from the Still buffer, the user should select an unused Still number first and then click "Save
Still'

The save process takes approximately 4 seconds, after which the new thumbnail picture will be shown
in the Stills display with its corresponding still number.

In addition, the still name or its description can also be added using the "Name" function.

Delete

To delete a saved still, click on the thumbnail picture of the still that is no longer needed and the selected still will
be highlighted with a yellow box around it. Click on "Delete" located at the bottom of the screen to remove the
selected still from the SE-1200 MU memory.
32