Datavideo SE-1200MU Quick Start Manual page 19

5. Click "Proc Amp" to configure "Black Level", "White Clip", and "Chroma Gain" for each input
6. Click the "Inputs Remapping" to set crosspoint
The SE-1200 MU has six input channels, which are mixed in different combinations. In the example illustrated below, the SE-
1200 MU setting is configured by enabling the desired video input channels and feeding the enabled combination to the
corresponding input channels.
1
1
Description of the above configuration example:

Input 1 is remapped to CH1 only.

Input 2 is remapped to CH2 & CH3.

Input 3 is remapped to CH4 only.

Input 5 is remapped to CH5 only.

Input 6 is remapped to CH6 only.
Input Remapping
2 3 4
2 3 4
Crosspoint Select
5 6
5 6
19