Loading A Previously Saved User Setup - Datavideo SE-1200MU Quick Start Manual

2. The Screen Menu will then appear as shown below.
3. The screen displays up to 16 user memory slots at a time. Click on a user memory slot and the selected user
slot will have a yellow border.
4. Click "Name" at the right hand corner of the bottom of the screen to open an on-screen keyboard and
then type a label name for the selected user memory slot. The label name can be up to 16 characters long
but only the first 10 letters will be displayed on the User Memories screen.
Note: If there are more than 16 User Setups stored in the SE-1200 MU, then use the up/down arrows to browse
through all user memory slots. The user memory slots are displayed in numerical order, and unused numbers will
not be shown.

Loading a previously saved User Setup

There are two ways to load a previously saved user setup. The two methods are described as follows:
1. USER/SHOT BOX Panel
To load a previously saved SE-1200 MU Setup, simply click the LOAD button on the USER/SHOT BOX panel
and an on-screen number pad will open.
54