Freeze Key Functions - Datavideo SE-1200MU Quick Start Manual

FREEZE Key Functions

This feature freezes a selected Input (Inputs 1 to 6) in order for the user to capture a good Stills Grab from the
input. The input to be frozen is best displayed on the Program monitor by selecting it on the Program source
row. The video can then be displayed for the user to freeze the image at the right point.
NOTE: the STILLS grab feature only captures images from the Program output.
Details of the FREEZE key functions are described below.
1. Click the Freeze button on the MENU SELECT panel
2. After clicking the Freeze button, you will then see 6 input slots displayed on the screen. Click on the input
that you wish to Freeze.
3. The Freeze parameters will then be displayed along the bottom of the screen. Click on the Mode option
located at the bottom left of the screen to enable/disable the freeze.
46