Pioneer CDJ-1000 Training Manual page 22

! Mode for checking audio output (using a connected PC)
In this mode, once you have connected a PC via the CN201 connector, which is directly connected to the system control
microcomputer on the MAIN Assy through a RS-232C Jig, the audio outputs can be checked.
Before entering this mode, it is necessary to disconnect the CN1101 connector on the MFLB Assy and remove the upper unit
(jog and display block), because the communication line is shared between audio output and display functions.
MFLB Assy
1
CN1101
Communication Soft
• Windows standard Hyper-Terminal
• Tera Term, CCT Win etc.
[Setup ]
• Baud Rate : 4800bps
• Data Bits : 8bit
• Stop Bits : 1bit
• Parity : None
Communication Command
Command Name
AD Audio Play
RJ Reject
OP Open
Supplement
(AD: Audio Play)
If the AD command is executed after disc insertion, audio playback of the designated piece of music starts.
Example: For audio playback of the third piece of music: 3AD
Note: Designate the number in the range from 1 to the number of pieces of music recorded.
2
To search for a designated piece of music, and start audio playback
To stop audio playback and disc rotation
To eject the disc
22
RS-232C Jig
Refer to "RS-232C Jig
Schematic diagram"
Description
MAIN Assy
CN201