MULTI PLAYER CDJ-2000 http://www.prodjnet.com/support/ The Pioneer website shown above offers FAQs, information on software and various other types of information and services to allow you to use your product in greater comfort. http://www.prodjnet.com/rekordbox/support/ For inquiries on rekordbox, please see the support site indicated above.
Thank you for buying this Pioneer product. Please read through these operating instructions so you will know how to operate your model properly. After you have fin- ished reading the instructions, put them away in a safe place for future reference.
Check equipment on thick carpet or a bed. the power cord once in a while. When you find it D3-4-2-1-7b_A_En damaged, ask your nearest PIONEER authorized service center or your dealer for a replacement. Operating Environment S002*_En Operating environment temperature and humidity: +5 °C to +35 °C (+41 °F to +95 °F);...
Contents How to read this manual The names of displays, menus, and buttons in this manual are enclosed in brack- ets. (e.g. [MASTER] channel, [ON/ OFF], [File] menu) ! The Operating Instructions of rekordbox can be viewed from the rekordbox [Help] menu after installing rekordbox.
DJ play with a Pioneer DJ Player (i.e. CDJ-2000, CDJ-900). Data that has been detected and measured, as well as any points which have been set and stored using rekordbox, can be used in combination with a Pioneer DJ Player (i.e.
WAVE DISPLAY WAVE displays indicate the data with a higher resolution than previous Pioneer products. NEEDLE SEARCH When the NEEDLE SEARCH pad is touched with a finger, the sound near the position at which the pad is touched is played instantaneously. This makes for faster point searching than ever before.
Record discs in ! Pioneer does not guarantee that all SD memory cards will operate on the a format playable on the CDJ-2000. For details, contact your application’s selling CDJ-2000.
Track information Meta tags (embedded tags) are supported. ! Some USB devices may not operate properly. Please note that Pioneer will Titles, album names, artist names, etc., are dis- accept no responsibility whatsoever for loss of data recorded on USB devices.
Part Names and Functions Control Panel Rear Panel 13 14 TAG TRACK UTILITY BACK / REMOVE BROWSE TAG LIST INFO MENU POWER LINK STANDBY POWER STOP UNLOCK LOCK AUDIO OUT CONTROL DIGITAL DISC EJECT DISC TIME AUTO MODE HOT CUE VINYL SPEED ADJUST 38 39 40 41...
b LINK (page 15) x TEMPO RESET and TEMPO RESET indicator Press this to play music files on media loaded in other DJ players. Regardless of the position of the TEMPO dial, tracks are played at the original playing speed recorded on the disc, etc. The indicator lights when USB (page 15) TEMPO RESET is turned on.
Main unit display 1 Information display section a NEEDLE This lights when needle searching is possible. 2 REMAIN b Time display (minutes, seconds and frames) This lights when the time display is set to the remaining time. There are 75 frames to a second. 3 TRACK c QUANTIZE This indicates the track number (01 –...
Connections Be sure to turn off the power and unplug the power cord from the power outlet whenever making or changing connections. Refer to the operating instructions for the component to be connected. Connect the power cord after all the connections between devices have been completed. Do not disconnect the LAN cable when music files and/ or information are being shared using PRO DJ LINK.
DJ mixer Power cable To an AC outlet Connections for relay play Relay play between two DJ players is possible by interconnecting the CDJ-2000 and a Pioneer DJ player using the CONTROL jacks (page 19). Control cord Audio cable Audio cable...
! When an SD memory card that has previously been loaded in the CDJ-2000 or a Pioneer DJ player is loaded, the number of discs for which WAVE informa- tion, etc., is recorded is displayed on the main unit display.
Browsing libraries and folders Forward and reverse scanning The browsing display differs depending on whether or not library information is Press [SEARCHm/ n]. recorded on the SD memory card/ USB device. When [SEARCHm/ n] pressed and held in, the track is fast-forwarded or fast- ! With library information d Library browsing: The music files are displayed by reversed.
Turn the rotary selector. Setting Cue The auto cue level setting changes. Changing procedure - [TIME MODE/ AUTO CUE] During playback, press [PLAY/ PAUSEf]. Playback is paused. Press [TIME MODE/ AUTO CUE] for at least 5 seconds. Press [CUE]. The auto cue level setting changing mode is set.
! When a hot cue is set during scratch play, playback may stop temporarily. Setting loops automatically (4-beat Loop) Playing hot cues During playback, press [4-BEAT LOOP/ LOOP CUTTER]. A loop of 4 beats starting from the point at which the button was pressed is set automatically according to the BPM of the currently playing track, and loop Press [HOT CUE REC/ CALL].
Storing cue and loop points Operating the jog dial The top of the jog dial has an embedded switch. Do not place objects on the jog Load an SD memory card/ USB device in the CDJ-2000. dial or subject it to strong forces. Also note that water or other liquids getting into the set will lead to malfunction.
! When the jog mode is set to VINYL, the speed at which playback starts when [PLAY/ PAUSEf] is pressed changes simultaneously. (Fader Start) Connect the CDJ-2000 with a Pioneer DJ mixer using the Operating the [NEEDLE SEARCH] pad included control cord.
the [HOT CUE] buttons (A, B and C) are not recorded in the history (they are Select [SEARCH] and enter the setting item. recorded when the hot cue is called out). A character appears at the bottom of the main unit display. ! The maximum number of tracks that can be recorded in [HISTORY] is 999.
Loading tracks from the tag list Using the [INFO] button The details of the tracks loaded in the CDJ-2000 can be checked by pressing Press [TAG LIST]. [INFO]. When DJ players are connected by PRO DJ LINK, the details of the tracks The tag list is displayed.
This can only be selected when a — [DEFAULT(PLAYER X)]: The [UTILITY] settings are changed into the set- LIBRARY CREATOR LIBRARY/ FOLDER medium on which a Pioneer MEP-7000 tings set upon purchase. library is recorded is loaded. — [PLAYER X]: [DUPLICATED] is displayed on the specified player’s dis-...
General terms — rekordbox can be used to classify and search for music files stored on 1 Limitation of Liability. In no event will Pioneer or its subsidiaries be liable your computer and create playlists used for DJ performance. in connection with this Agreement or its subject matter, under any theory —...
An Ethernet LAN adapter (RJ45 port) for communicating with the DJ LAN port player is required to transfer music files to a Pioneer DJ player (i.e. CDJ-2000, CDJ-900). Full functionality is not guaranteed on all computers, even those meeting the operating environment requirements described above.
Also, be sure not to forget the login name (your e-mail address) and the password specified for your user registration, as well as the license key. ! Pioneer Corporation collects your personal information for the following purposes: To provide customer support for your purchased product...
! The driver software is compatible with the following OSs. — Windows ® 7 Home Premium/ Professional/ Ultimate Click Windows [Start] menu > [All Programs] > [Pioneer] > [Pioneer — Windows Vista ® Home Basic/ Home Premium/ Business/ Ultimate (SP1 or CDJ] >...
Press [MENU/ UTILITY]. Checking the version of the driver software The previous screen reappears. Click Windows [Start] menu > [All Programs] > [Pioneer] > [Pioneer List of MIDI Messages CDJ] > [Pioneer CDJ Version Display Utility]. MIDI Messages SW Name...
! Irregularly shaped discs other than standard 12 cm discs cannot be played on the CDJ-2000 (doing so will lead to damage or accidents). ! The BPM measured by the CDJ-2000 may differ from the BPM indicated on the disc or that of a Pioneer DJ mixer, etc. This is due to the different methods used for measuring the BPM, and is not a malfunction.
When the CDJ-2000 cannot operate normally, an error code appears on the display. Take the necessary measures, referring to the table below. If an error code not indicated on the table below is displayed or if the same error code appears after the indicated action has been taken, contact your store of purchase or nearby Pioneer service station.
Cleaning the lens The player’s lens should not become dirty in normal use, but if for some reason it should malfunction due to dust or dirt, consult your nearest Pioneer authorized service center. Although lens cleaners for players are commercially available, we advise against using them since some may damage the lens.
Disclaimer Specifications ! Pioneer and rekordbox are trademarks or registered trademarks of the Power requirements ................AC 120 V, 60 Hz Pioneer Corporation. Power consumption ....................28 W ® ® ® ® ! Microsoft , Windows Vista , Windows and Internet Explorer are registered Power consumption (standby) ................0.4 W...
In Canada/Aux Canada http://www.pioneerelectronics.ca S018_B1_EnFr Published by Pioneer Corporation. Copyright © 2010 Pioneer Corporation. All rights reserved. PIONEER CORPORATION 1-1, Shin-ogura, Saiwai-ku, Kawasaki-shi, Kanagawa 212-0031, Japan PIONEER ELECTRONICS (USA) INC. P.O. BOX 1540, Long Beach, California 90801-1540, U.S.A. TEL: (800) 421-1404 PIONEER ELECTRONICS OF CANADA, INC.