Functions - Pioneer CDJ-1000 Training Manual
Hide thumbs
Also See for CDJ-1000:
- Operating instructions manual (96 pages) ,
- Service manual (93 pages) ,
- Service manual (68 pages)
Table of Contents
Advertisement
LOOP IN/REALTIME CUE/IN ADJUST button/indicator (*)
4
Real-time cue
Enter loop in point
Loop in point adjust
LOOP OUT/OUT ADJUST button/indicator (*)
5
Enter loop out point
Loop out point adjust
RELOOP/EXIT button (*)
6
Display
7
2 3
WAVE SEARCH (ZOOM)/CD TEXT buttons ( , ) (*)
8
This button moves the displayed area when WAVE is in zoom display mode.
2
In the TEXT display mode, pressing the
button will display the disc title
3
and pressing the
button will display the track title.
2 3
CUE/LOOP CALL buttons ( ,
) (*)
9
Calls Cue points and Loop points stored in internal memory or external memory
(when a memory card is inserted). (When a memory card is inserted, the ex-
ternal memory takes precedence.)
CUE/LOOP MEMORY button (*)
0
Stores Cue points and Loop points in internal memory or external memory
(when a memory card is inserted). (When a memory card is inserted, the ex-
ternal memory takes precedence.)
DIGITAL OUT mode switch (DJ/NORMAL)
-
This switch is located on the unit’s rear panel.
When set to DJ, the DIGITAL OUT connector outputs audio data alone. When
set to NORMAL, digital data (including sub-codes) is output, but the unit’s DJ
functions are not supported (operation buttons marked with the asterisk (*)
are disabled). No sound will be produced in the Pause mode.
CUE/LOOP DELETE button (*)
=
Deletes Cue points or Loop points stored in internal memory or external memory
(when memory card is inserted). (When a memory card is inserted, the exter-
nal memory takes precedence.)
EJECT UNLOCK/LOCK switch
~
UNLOCK: In this mode the disc can be ejected even during playback.
LOCK: In this mode, the disc cannot be ejected during playback. The disc can
be ejected when in pause mode.
EJECT button ( )
0
!
When this button is pressed the disc is ejected through the disc insertion slot
when it stops rotating. When the EJECT UNLOCK/LOCK switch is set to
[LOCK] position, the disc can only be ejected when in pause mode.
VINYL SPEED ADJUST TOUCH/BRAKE dial (*)
@
When the JOG MODE SELECT button is set to [VINYL] position, you can
use this dial to adjust the speed by which the playback stops when the surface
of the Jog dial is pressed.
Playback stops faster as the dial is turned counterclockwise and stops slower
as the dial is turned clockwise.
VINYL SPEED ADJUST RELEASE/START dial (*)
#
When the JOG MODE SELECT button is set to [VINYL] position, you can use this
dial to adjust the speed by which playback starts after you take your hand off the
surface of the Jog dial. Playback starts normal speed faster as the dial is turned
counterclockwise and takes longer time to return to normal speed when turned
clockwise.
JOG MODE SELECT button (*)
$
VINYL mode: when the surface of the Jog dial is pressed during playback, play-
back stops and if the dial is rotated, music is output according to the speed the dial
is turned.
The JOG MODE is stored in memory and remains in memory even if the
power is turned off.
CDJ mode: above operation is not performed even when the Jog dial surface
is pressed.
VINYL indicator (*)
%
This indicator lights when the JOG MODE is in VINYL mode.
CDJ indicator (*)
^
This indicator lights when the JOG MODE is in CDJ mode.
TEMPO Control Range button ±6/±10/±16/±100 WIDE (*)
&
Each time the button is pressed, the range changes (±6%/±10%/±16%/±100%).
MASTER TEMPO button/indicator (*)
*
Each press of the button turns the master tempo function on or off.
Tempo Control knob (*)
(
Slide the knob towards you (+) to increase the tempo and slide it away from
you (–) to decrease it.
Tempo Reset indicator (*)
)
Shows that the tempo has been reset to [0] (normal tempo) regardless of the
position of the Tempo Control knob.
TEMPO RESET button (*)
_
Resets the tempo to [0] (normal tempo) regardless of the position of the
Tempo Control knob. Press button once more to release it.
Jog Dial Display
+
Jog dial (+FWD/–REV) (*)
¡
Disc Loading Slot
™
Force Ejection Hole
£
Memory Card Loading Slot
¢
Memory Card indicator
∞
Lights when the MMC card is being accessed.
Do not remove the card or turn off the power when this lamp is on.
Play/Pause indicator
§
Lights during play and flashes during pause.
6
PLAY/PAUSE button (
)
¶
CUE indicator (*)
•
Lights when a Cue point is set and a search is not being performed. Flashes in
pause mode.
CUE button (*)
ª
Cue point settings
Cue point sampler
Back cue
1 ¡
SEARCH button (
,
)
º
TRACK SEARCH button (
4 ¢
,
)
–
Reverse indicator (REV) (*)
≠
Lights when the DIRECTION FWD/REV switch is set to reverse.
DIRECTION FWD/REV switch (*)
Ÿ
Plays tracks backwards when set to the [REV] position (forward position).
HOT CUE REC MODE button (*)
⁄
Switches HOT CUE button function (REC/CALL).
It is set to call when the power is turned on.
HOT CUE A, B, C button/indicator
¤
It is set to hot cue point recording mode when A, B and C light in red.
It is set to call mode when A, B and C light in green. When the button is
pressed, playback starts from the hot cue point. It is off when no hot cue point
has been recorded.
Page 5
Advertisement
Table of Contents
