Warnings
Before you begin programming, please read the important
safety warnings below.
•
Never go inside the drive enclosure. The capacitor bank holds a 230 volt
charge, even if there is no power to the unit.
•
Do not submerse the IntelliFlo
•
The pump is capable of 130 GPM or 110 feet of head. Use caution when
installing and programming to limit pump performance when plumbed with
old or questionable equipment.
•
Manual mode shuts off all sensors, including Suction Blockage. Use only
when metering the system, or in an emergency.
•
The pump should be wired for constant power. The pump is designed to
turn itself on and off.
•
Always stop the pump before performing maintenance.
Important Safety Warnings
VF Variable Flow Pump.
®
IntelliFlo
Pump Quick-Start Guide
®
VF
3