Programming The Heating Periods - IDEAL ESPRIT 2 24 User Manual

3 PROGRAMMING THE HEATING (OR HOT WATER) PERIODS
DISPLAY SHOWS time / day
and backlight is OFF
DISPLAY SHOWS time / day
and backlight is ON
The left hand "Timed" is flashing, together
with the Radiator symbol and the word
"PROG" is showing
S
Radiator (or Tap) symbol is steady.
The seven days of the week are flashing
"1" flashes, indicating that you have
selected period 1 on the day(s) shown
"ON" flashes, and a time is showing
The "hours" figure flashes
The "minutes" figure flashes
(12 hr mode only)
The "am" or "pm" symbol flashes
Display returns to flashing "ON" etc.
8
ITIME PROGRAMMER
P
Press 'PROG' button briefly
P
Press 'PROG' button briefly
For Hot Water
For Heating
P
is the PROG button
S
is the SELECT button
are the UP and DOWN buttons
Press down arrow twice or
up arrow twice until . .
The right hand "Timed" is flashing,
together with the Tap symbol
and the word "PROG" is showing
Use Up and Down Buttons to set
chosen day. (You can also select groups
Mon-Fri, Sat-Sun, Mon-Sun)
S
Select period 2 or 3 if required.
S
Select "ON" or "OFF" as required.
You can also select "DELETE" to
exclude this time period altogether.
S
S
Set minute
S
Set as appropriate
S
Now repeat for the "OFF" time
Next, do the same for period 2 (and 3)
Then repeat for other days as required
Set Hour
ESPRIT 2 -
P
P P
User's