Table of Contents
Advertisement
8
/
5
8
0 m
2 2
dai3435aus
Draw two intersecting lines on the
ceiling.
8
"
5
2 2
/
8
"
m
0 m
m
For vented mode:
– Place a section of the exhaust duct‐
ing in the ceiling and feed it down
through the cross-sectional area as
illustrated. Exhaust ducting of ap‐
prox. 27 ⁹/₁₆" (700 mm) length is re‐
quired between the ceiling and the
hood exhaust socket.
– Secure the exhaust ducting to the ex‐
haust socket, e.g. with a hose clip
(available as an optional accessory)
on flexible ducting.
Place the power cord and guide it
through the ceiling in the area shown.
A power cord approx. 27 ⁹/₁₆"
(700 mm) in length is required be‐
tween the ceiling and the hood con‐
nectors.
Installation
35
Advertisement
Table of Contents
