Table of Contents
Advertisement
Installation
A non-return flap is supplied with the
hood or is already fitted in the exhaust
socket of the motor unit (depending on
model).
With vented mode (AE) insert the
non-return flap in the exhaust socket
if your ducting system is not equip‐
ped with one.
Recirculation mode (RM) does not re‐
quire the non-return flap to be insert‐
ed. If there is one present, it should
be removed.
42
Hang the hood on the brackets, mak‐
ing sure that the controls are at the
front.
Secure the hood with the screws
supplied.
Advertisement
Table of Contents
