Table of Contents
Advertisement
Installation of the Con@ctivity
2.0 stick
In order for you to be able to use the
Con@ctivity 2.0 function, the cooktop
must be equipped with a Con@ctivity
2.0 stick.
See the relevant installation instruc‐
tions of the Con@ctivity 2.0 stick.
Activating the Con@ctivity 2.0
function
To use the Con@ctivity 2.0 function, the
radio link between the cooktop and the
ventilation hood must be activated.
Both appliances must be installed and
operational.
Wireless connection must be activated
on the ventilation hood and the cooktop
at the same time. Activation on the ven‐
tilation hood is described below.
Activation on the cooktop is described
in the relevant operating and installation
instructions. Please refer to the operat‐
ing instructions before starting.
Activate the ventilation hood first, then
the cooktop.
Activating Con@ctivity 2.0
Activating the ventilation hood
The cooktop and hood must be
turned off.
Press the delayed shut down button
for approx. 10 seconds until 1
lights up in the fan setting display.
Next, tap the following buttons in
succession:
– The 1 button,
– Then the IS button,
– And then the lighting button .
The hood is in log on / log off mode.
If the wireless connection is already ac‐
tivated, 2 and 3 will light up at the same
time.
If there is no wireless connection, 2 and
3 will flash constantly (Con@ctivity 2.0
is already activated or a remote control
is logged on).
To activate Con@ctivity 2.0, tap the
IS button.
The search for a wireless connection
will start.
As this is happening, begin activation
on the cooktop.
49
Advertisement
Table of Contents
