Section Ii - Recording Midi With The Lambda Studio - Lexicon Lambda Owner's Manual

Recording a Guitar Using the Instrument Input
3. In the Audio 01 window, the Record Enable button
4. In the Audio 01 window, make sure the Input Monitoring button
5. Next, adjust the input gain of the Instrument input. To set the input level, strum
6. To begin recording, click the Record button on the Transport control. Play some
7. Click the Play button to listen to the track you have just recorded.

SECTION II - RECORDING MIDI WITH THE LAMBDA STUDIO™

The Lambda Studio™ also functions as a MIDI interface. This allows you to record MIDI
data into a MIDI track of Cubase
into a keyboard, sound module or effects processor.
If it isn't, click it so that it turns red.
the guitar while gradually turning up the Line 1 knob. It's OK if the Peak LED
lights occasionally with the loudest signals. Check the Input Bargraph Meter
on the front of the Lambda Studio™ to make sure you are not clipping.
chords or notes on the guitar. When you are finished recording, click Stop, then
Rewind.
Record Button
Play Button
26
Rewind Button
® LE 4, and play that MIDI data back from the computer
should already be red.
is not lit.
Stop Button