Table of Contents
Advertisement
User Manual of DS-6300DI Decoder
Purpose:
If you don't know the IP address of the decoder and this is not the first time you use the decoder, you
can use SADP (IP finder) software or the Serial port tools to find out the IP address of the decoder and
to configure the IP address or other network parameters of it. It is recommended to change the default
IP address for the first time to use it.
This chapter aims to tell the procedures of using the Hyper Terminal Software to find and configure the
IP address and other parameters of the device.
For the operation of the SADP software, please refer to the User Manual of the SADP software.
Note:
For the first-time user, the default user name of DS-6300DI is admin, and password is 12345. And the
default IP address is 192.0.0.64.
3.1 Connecting the decoder by Hyper Terminal
Tools
Purpose:
By connecting decoder and PC with serial line via RS-232 interface, run the Hyper Terminal application, you can
get and modify the network parameters of the decoder with serial commands.
Steps:
Run the Hyper Terminal application on your PC
1.
2.
Input a name (e.g. HK) and select an icon
3.
Click OK to enter the next dialogue box.
17
Advertisement
Table of Contents
