Transparent Channel - HIKVISION DS-6301DI User Manual

User Manual of DS-6300DI Decoder
Note: The Display Channel Status of device will be refreshed automatically by regularly.

5.1.11 Transparent Channel

Purpose:
The "Transparent Channel" refers to the transmission channel used for forwarding data between the Decoder and
the Encoder without operating on the data transferred.
Steps:
1. Click Decode OperationTransparent Channel to view the configuration information of the current channel.
Enter the device information in the "Remote Host IP Address","Remote Host Port", "User Name",
2.
"Password" of the encoding device.
In the list, the "Local Serial Port" refers to the serial port used as the transparent channel by the Decoder,
while the "Remote Serial Port" refers to the serial port used as the transparent channel by the Encoder.
Click Modify to finish the settings. Click Refresh and the status in the "Connection Status" will be displayed
3.
as "Connecting" if the connection is successful.
Note: Up to 64 DVRs or DVSs are allowed to establish transparent channel transmission with a Decoder. When
the RS-232 port is used as the "Local Serial Port", user must select the Operation mode to Transparent Channel by
entering the Parameter ConfigureSerial Port ParametersRS232 Settings interface.
40