Table of Contents
Advertisement
2.5 Network Adapter Configuration for Pleora eBUS SDK
Open the Network Connections window (Control Panel -> Network and Internet Connections ->
Network Connections), right click on the name of the network adapter where the Photonfocus
camera is connected and select Properties from the drop down menu that appears. A
Properties window will open. Check the eBUS Universal Pro Driver (see Fig. 2.8) for maximal
performance. Recommended settings for the Network Adapter Card are described in Section
2.4.
Figure 2.8: Local Area Connection Properties
.
2.5 Network Adapter Configuration for Pleora eBUS SDK
17
Advertisement
Table of Contents
