Download Print this page

Photon Focus MV1-D1024E User Manual page 14

Gigabit ethernet series cmos area scan cameras

Hide thumbs Also See for MV1-D1024E:

Table of Contents

2 How to get started (GigE G2)

By default, Photonfocus GigE Vision cameras are conﬁgured to obtain an IP address

automatically. For this quick start guide it is recommended to conﬁgure the network

adapter to obtain an IP address automatically. To do this, select Internet Protocol (TCP/IP)

(see Fig. 2.4), click the Properties button and select Obtain an IP address automatically

(see Fig. 2.5).

Figure 2.5: TCP/IP Properties

Table of Contents