Specifications - Kohler KG2204 Operation

SPECIFICATIONS

Size Measurement
M6 x 1.00 N•m (ft.lb.)
M8 x 1.25 N•m (ft.lb.)
M8 x 1.00 N•m (ft.lb.)
M10 x 1.50 N•m (ft.lb.)
M10 x 1.25 N•m (ft.lb.)
M12 x 1.75 N•m (ft.lb.)
M12 x 1.50 N•m (ft.lb.)
M14 x 2.00 N•m (ft.lb.)
M14 x 1.50 N•m (ft.lb.)
M16 x 2.00 N•m (ft.lb.)
M16 x 1.50 N•m (ft.lb.)
M18 x 2.50 N•m (ft.lb.)
M18 x 1.50 N•m (ft.lb.)
NOTE:
1. The torque values above are general guidelines. Always use the torque values specified in the service
manuals and/or assembly drawings when they differ from above torque values.
2. The torque values above are based on new plated threads. Increase torque values by 15% if non-plated
threads are used.
3. Hardware threaded into aluminum must have either two diameters of thread engagement or a 30% or more
reduction in the torque to prevent stripped threads.
4. Torque values are calculated as equivalent stress loading on American hardware with an approximate preload
of 90% of the yield strength and a friction coefficient of 0.125.
46 Specifications
Metric Fasteners Torque Specifications
Torque
Grade 5.8
6.2 (4.6)
15.0 (11)
16.0 (11)
30.0 (22)
31.0 (23)
53.0 (39)
56.0 (41)
83.0 (61)
87.0 (64)
127.0 (94)
132.0 (97)
179.0 (132)
189.0 (140)
Assembled into Cast Iron or Steel
Grade 8.8
12 (9)
29.6 (22)
24.0 (18)
52.5 (39)
47.0 (35)
80.0 (59)
85.0 (63)
135.0 (100)
133.0 (98)
194.0 (143)
201.0 (148)
273.0 (201)
289.0 (213)
Assembled into
Aluminum Grade
Grade 10.9 5.8 or 8.8
13.6 (10)
33.0 (24)
34.0 (25)
65.0 (48)
68.0 (50)
115.0 (85)
122.0 (90) See Note 3
180.0 (133)
190.0 (140)
278.0 (205)
287.0 (212)
390.0 (288)
413.0 (305)
TP-6901 6/14