Figure 2-2. Vista Rj-45 Connector With Built-In Leds - NETGEAR FS518 Installation Manual

Installation Guide for the Model FS518 Fast Ethernet Switch
As Figure 2-1 shows, the Model FS518 switch is equipped with 16 autosensing 10/100 Mbps Fast
Ethernet UTP ports. The network access speed for the 10/100 Mbps ports is automatically sensed
and displayed on the front panel by the 10 Mbps or 100 Mbps Link LEDs.
The 10/100 Mbps ports support only unshielded twisted pair (UTP) cable using an 8-pin RJ-45
plug. Each of the 10/100 Mbps ports uses vista RJ-45 connectors that have built-in LEDs, as
illustrated in Figure 2-2. The LEDs, as described in
connection to the port is valid and that the port is operating at either 10 or 100 Mbps.
For further information about the vista RJ-45 connector and the RJ-45 plug, refer to
"Connector Pin Assignments," and
1 2
735EA
Key:
1 = 100M link LED
2 = 10M link LED
Figure 2-2. Vista RJ-45 Connector with Built-In LEDs
2-2
Table 2-1
Appendix C, "Cabling
on page 2-5, indicate that the
Guidelines."
Physical Description
Appendix B,