Buick Enclave Owner's Manual page 71

2. Pick up the latch plate and pull
the belt across you. Do not let it
get twisted.
The lap-shoulder belt may lock if
you pull the belt across you very
quickly. If this happens, let the
belt go back slightly to unlock it.
Then pull the belt across you
more slowly.
If the shoulder portion of a
passenger belt is pulled out
all the way, the child restraint
locking feature may be engaged.
If this happens, let the belt go
back all the way and start again.
3. Push the latch plate into the
buckle until it clicks.
4. Pull up on the latch plate to
make sure it is secure. If the belt
is not long enough, see Safety
Belt Extender on page 3 22.
Position the release button on
the buckle so that the safety belt
could be quickly unbuckled if
necessary.
I n f o r ma t i o n P r o v i d e d b y :
Seats and Restraints
5. If equipped with a shoulder
belt height adjuster, move it to
the height that is right for you.
See Shoulder Belt Height
Adjuster later in this section
for instructions on use and
important safety information.
6. To make the lap part tight,
pull up on the shoulder belt.
It may be necessary to pull
the stitching on the safety belt
through the latch plate to fully
tighten the lap belt on smaller
occupants.
3-17