Bulb Replacement
For the proper type of replacement
bulbs, see Replacement Bulbs on
page 10 30.
For any bulb changing procedure
not listed in this section, contact
your dealer.
Halogen Bulbs
WARNING
Halogen bulbs have pressurized
gas inside and can burst if you
drop or scratch the bulb. You or
others could be injured. Be sure
to read and follow the instructions
on the bulb package.
High Intensity Discharge
(HID) Lighting
WARNING
The low beam high intensity
discharge lighting system
operates at a very high voltage.
If you try to service any of the
system components, you could
be seriously injured. Have your
dealer or a qualified technician
service them.
After an HID headlamp bulb has
been replaced, the beam might be a
slightly different shade than it was
originally. This is normal.
I n f o r ma t i o n P r o v i d e d b y :
Vehicle Care
Taillamps, Turn Signal,
Sidemarker, and
Stoplamps
A. Taillamp
B. Sidemarker Lamp
To replace one of these bulbs:
1. Open the liftgate. See Liftgate
on page 2 10.
2. Remove the black cuff from
the lamp assembly by pulling
rearward from the top to
unfasten it from the snap tabs.
10-29