Buick Enclave Owner's Manual page 238

7-54 Infotainment System
Pairing
A Bluetooth enabled cell phone
must be paired to the Bluetooth
system and then connected to
the vehicle before it can be used.
See the cell phone manufacturer's
user guide for Bluetooth functions
before pairing the cell phone. If a
Bluetooth phone is not connected,
calls will be made using OnStar
Hands Free Calling, if equipped.
See OnStar Overview on page 14 1
for more information.
Pairing Information
A Bluetooth phone with MP3
capability cannot be paired to
the vehicle as a phone and an
MP3 player at the same time.
Up to five cell phones can be
paired to the Bluetooth system.
The pairing process is disabled
when the vehicle is moving.
Pairing only needs to be
completed once, unless the
pairing information on the cell
phone changes or the cell phone
is deleted from the system.
Only one paired cell phone can
be connected to the Bluetooth
system at a time.
If multiple paired cell phones
are within range of the system,
the system connects to the first
available paired cell phone in the
order that they were first paired
to the system. To connect to a
different paired phone, see
Connecting to a Different
Phone later in this section.
Pairing a Phone
1. Press and hold /
two seconds.
2. Say Bluetooth. This command
can be skipped.
I n f o r ma t i o n P r o v i d e d b y :
3. Say Pair. The system responds
with instructions and a four digit
Personal Identification Number
(PIN). The PIN is used in Step 5.
4. Start the pairing process on the
cell phone that you want to pair.
For help with this process, see
the cell phone manufacturer's
user guide.
5. Locate the device named
Your Vehicle in the list on
the cell phone. Follow the
instructions on the cell phone
to enter the PIN that was
provided in Step 3. After the
PIN is successfully entered,
the system prompts you to
provide a name for the paired
cell phone. This name will be
for used to indicate which phones
are paired and connected to the
vehicle. The system responds
with <phone name> has been
successfully paired after the
pairing process is complete.
6. Repeat Steps 1 through 5 to pair
additional phones.